User Panel
|
Thanks for the updates Josiah! Though these uppers are not true clone uppers, they are pretty darn close and should be tac drivers if they are anything like the older 14.7 A1s you sold awhile ago! I have already ordered one of these uppers yesterday and hope to save up for another in the future!
|
|
Is there any chance you could verify the gas port size?
Hoping these are .062 or similar to avoid needing a gas port insert. |
|
Not close to a clone but that’s ok.
I’ll look elsewhere after eagerly awaiting this new upper. |
|
Anyone get their Upper yet? I should be getting mine tomorrow and I'll try to take some pics and post them on here.. Soon there after I'll through on a P&S products RAS and a Ma-Tech BUIS that have been sitting in the drawer.. I will probably through on a Aimpoint pro( or a Primary Arms copy) with a authentic Aimpoint grabber mount, as well as a Surefire weapons light of some sort and then call it a Day
|
|
The Brown Truck dropped this guy off today! Attached File
Attached File Attached File Attached File Attached File |
|
Attached File
Attached File Attached File Only issue so far are the machine marks seen in the pictures, but other than that its seems GTG and should be a sweet shooter! |
|
Quoted:
The Brown Truck dropped this guy off today!https://www.AR15.Com/media/mediaFiles/375866/20191029_150509_jpg-1141752.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150518_jpg-1141753.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150531_jpg-1141756.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150550_jpg-1141762.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150726_jpg-1141763.JPG View Quote Quoted:
https://www.AR15.Com/media/mediaFiles/375866/20191029_150848_jpg-1141764.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150602_jpg-1141765.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150612_jpg-1141766.JPG Only issue so far are the machine marks seen in the pictures, but other than that its seems GTG and should be a sweet shooter! View Quote |
|
|
|
|
Quoted:
The Brown Truck dropped this guy off today!https://www.AR15.Com/media/mediaFiles/375866/20191029_150509_jpg-1141752.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150518_jpg-1141753.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150531_jpg-1141756.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150550_jpg-1141762.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150726_jpg-1141763.JPG View Quote |
|
Quoted:
They pop up in the EE every now and then. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
P&S products RAS Charlie's Custom Clones had them awhile back (at their usual rapey pricing). Gunpartscorp sold out a shit ton of M5s. |
|
I got my P&S Products rail on EE a couple years ago.. I am pretty sure they sell some of their over run Rails to bigger companies on occasion, do to seeing them on Brownells here and there over the years
|
|
Quoted: Thanks for the pics. Mine should be here Friday. I’ve got a Colt 14.5” SOCOM upper that I’m going to compare it to. View Quote |
|
|
Attached File
Sorry for the crappy pic, but here is the finished product, well for now.. Over time I'll get a Surefire, Aimpoint Pro, Sling, and lastly a Peq of some sort |
|
@curbo2683
Thanks for posting the images of your upper. Just ordered 2 of the M4A1 uppers, I've got a few spare Colt M4 Carbine marked lowers and other goodies all ready for them when they arrive. PSA strikes again! |
|
@Darkstar
No problem, glad I could help.. I would be lying if I didn't say I was a bit jealous you have some of those Colt Lowers, I knew I should of ordered a couple why they where available!?? You should have a couple of sweet blasters after you are finished getting those all put together, and I hope we are lucky enough to see them! |
|
Quoted:
@Darkstar No problem, glad I could help.. I would be lying if I didn't say I was a bit jealous you have some of those Colt Lowers, I knew I should of ordered a couple why they where available!?? You should have a couple of sweet blasters after you are finished getting those all put together, and I hope we are lucky enough to see them! View Quote I'll get these out and test them and see how they compare to my Colt SOCOM's with 14.5" p/w barrels. Those Colt barrels are silly accurate and something tells me PSA has got a real winner on their hands with this new offering! |
|
Quoted:
https://www.AR15.Com/media/mediaFiles/375866/20191029_150848_jpg-1141764.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150602_jpg-1141765.JPGhttps://www.AR15.Com/media/mediaFiles/375866/20191029_150612_jpg-1141766.JPG Only issue so far are the machine marks seen in the pictures, but other than that its seems GTG and should be a sweet shooter! View Quote ETA: Disregard my question, just got my tracking number |
|
The BBT dropped off the 2 uppers. A few images, any yellow/orange shading you see is from my workbench light.
Attached File Attached File Attached File Attached File Attached File Used some spare complete Colt M4 Carbine lowers, Colt BCG's/CH's, and Aimpoint PRO's to finish them out. I'll spend some time smoothing off the pin/weld locations and then touch them up. I'm going to reach out to Shark Arms and pick up 2 more Colt M4 double heat shield handguards and 2 more MaTech rear sights. I'll set them up for slings but beyond that, they're done. Keep it simple... |
|
Quoted:
The BBT dropped off the 2 uppers. A few images, any yellow/orange shading you see is from my workbench light. https://www.AR15.Com/media/mediaFiles/555/DSCN3061_JPG-1148812.JPG https://www.AR15.Com/media/mediaFiles/555/DSCN3062_JPG-1148813.JPG https://www.AR15.Com/media/mediaFiles/555/DSCN3065_JPG-1148815.JPG https://www.AR15.Com/media/mediaFiles/555/DSCN3067_JPG-1148816.JPG https://www.AR15.Com/media/mediaFiles/555/DSCN3073_JPG-1148822.JPG Used some spare complete Colt M4 Carbine lowers, Colt BCG's/CH's, and Aimpoint PRO's to finish them out. I'll spend some time smoothing off the pin/weld locations and then touch them up. I'm going to reach out to Shark Arms and pick up 2 more Colt M4 double heat shield handguards and 2 more MaTech rear sights. I'll set them up for slings but beyond that, they're done. Keep it simple... View Quote |
|
|
|
Quoted: @PalmettoStateArmory Is there any chance future uppers will come out with the p/w already fixed? Or can be sent back to be grind down? These look sloppy honestly. View Quote |
|
|
Quoted:
I have sent the suggestion up the line! Thanks, Josiah View Quote View All Quotes View All Quotes .....now.....offer these barrels separately soon?? |
|
I didn’t order in time. Do you know when they will be back in stock?
|
|
|
|
Quoted:
I didn’t order in time. Do you know when they will be back in stock? View Quote View All Quotes View All Quotes Quoted:
Guys, We are working with FN, and will have the M203 cuts on the next batch. Same barrel, but with the cuts. This will not happen in Q4. It will be more like Q1. I am trying to work more hands-on to get an upper and build kit that are closest to a clone that we can get! This first batch was not meant to be a true "clone." Due to our manufacturing buyers getting ready for our busy season- Black Friday through at least February - they did not have time to dedicate to making a true clone. This is why we did not put "clone" in the item description, and why I am working on it myself as I have time. If you ever have suggestions, please, no matter what thread, us the @palmettostatearmory so I will actually see it. Thanks, Josiah |
|
|
Quoted:
Quoted:
I didn’t order in time. Do you know when they will be back in stock? Quoted:
Guys, We are working with FN, and will have the M203 cuts on the next batch. Same barrel, but with the cuts. This will not happen in Q4. It will be more like Q1. I am trying to work more hands-on to get an upper and build kit that are closest to a clone that we can get! This first batch was not meant to be a true "clone." Due to our manufacturing buyers getting ready for our busy season- Black Friday through at least February - they did not have time to dedicate to making a true clone. This is why we did not put "clone" in the item description, and why I am working on it myself as I have time. If you ever have suggestions, please, no matter what thread, us the @palmettostatearmory so I will actually see it. Thanks, Josiah |
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.