User Panel
Posted: 2/16/2006 12:34:04 PM EDT
I was rummaging through a box o' crap and uncovered an old model rokcet engine...a C6.
How safe would it be to attach this thing (I was thinking superglue or duct tape) to a dowel rod and light her up? Then again, there is the return to earth and bonking someone on the head... |
|
most likley you could not predict where it would go.
if you plan to do this PLEASE use an electronic model rocket ignitor and not a match. you could have just as much fun by drilling hole half way thru a 4x6 and dropping the engine in it and doing an engine test. |
|
oh, I seriously doubt that |
|
|
what do you mean? i am trying to keep him alive and all his shit unburnt. . |
||
|
super glue about 16" of dowel rod to it, stick 5-6 seconds of fuse in and let 'er rip.
|
|
We used to build PVC launchers for them. Be sure to wear goggles as the engine might still be burning when it exits the tube.
|
|
well, I wasn't factoring in the "alive" part |
|||
|
You could do what that dood did in the compfused vid and stick it in a friends ass and light it while hes laying on his back...
|
|
I have a pipe about 1 1/4" in dia. and about 3 feet long that will serve nicely as a launching pad.
No wooden dowels. How about i cut up a wire hanger? |
|
NO MORE WIRE HANGERS!!!! |
|
|
do you really want to "fly" a lawn dart up to 5 hundred feet or so and let it fall back to earth?
|
|
are you worried about the construction of the much feared "abc" weapon? |
|
|
In the name of science, some risks have to be taken.
|
|
|
Don't be stupid. You'll need to ignite it electronically as I believe fire DOES NOT work. If you use metal coat hanger remember to wieght the top and have no overhang so that it does not become a projectile. Maybe you should just forget about this and instead make mini flares with post-it notes, fuse, tape and a road flare cut open.
|
|
you've never used model rocket engines apparently |
|
|
You'll need a dowel if you want a stable flight. The stick on a bottle rocket acts in the same manner as a tail on a kite. |
|
|
Fire works reliably with black powder engines but not with composites. |
||
|
Heck ya, green fuses from local hobby store....Light and run, forget those old grey turn key push button little kid NASA feeling ignitors where the switch has a flah light bulb where you are supposed to be mission command igniting a SATURN III launch vehicle. Light and Run, light and run. |
||
|
oh great. now he's going to want to strap it to a kite. |
||
|
Normally I'd say don't do it, but since it's you, go right ahead.
|
|
Ought to be fun...use about 2" of green waterproof cannon fuse to light it. Most blackpowder shops (muzzleloaders, etc.) stock the fuse.
Ain't fun if it ain't dangerous!! |
|
Boring. zzzzzzzzzzzzzzzzzzzzz put it in a rocket and put as much ffff as it can lift. glue on the nose cone and wahla...ballistic missle
|
|
when i was younger, we took a pvc pipe(4' long), taped the eloctronic ignitor to the side of the pipe,ran the wires to the end of the tube, and taped a piece of metal to the end to keep the rocket engine from falling out.
it was a lot of fun. the small rocket engines would go a long ways - even though they weren't inside a rocket. |
|
BTDT, dove for cover! Soda straw. It was fun, I'd do it again
aa |
|
Don't use wire for the guide rod. It is too heavy. Voice of experience here.
Use a lightweight dowel, 1/8" hardwood is perfect. Make it 18" long as this has worked for me. Tape it well to the body of the engine and use a wood kitchen match for the "fuse". Jam it head first into the nozzle . Suspend the rocket in a pipe and light the other end of the match. The flame will hit the head and the rocket will ignite. I launched some mega salutes using D12-7 engine this way. These were 5 gram flash salutes...lots of fun as they went about 1000 feet before exploding. |
|
what ever you do dont crush the body in a vise or roll it on the ground under foot. esp just the center part then put in an ignitor and bury it... it just make make a small crater
|
|
Used to do this all the time. A dowel rod works perfectly. By the way, when I was a kid we made a bazooka out of some 8" round duct. Rocket motors taped to sticks were the ammo. Turns out the makers of the motors knew that kids would do this and adjusted the power curve to start slow.
So what ended up happening was the rocket would sputter out of the tube and fall on the ground. It would then go full blast and go off in some crazy direction. I solved this problem by rigging a device that allowed me to hold the rocket until it was up to full power then release it. Laser beam straight shots. We even put a sight on it. The old man hit me on the head and took it away. |
|
You are not doing it right. You need a bit of 4F blackpowder in the nozzle. We would fill the nozzle level with it, sealing it with a bit of tape, then punching a hole in it with a needle and inserting the ignitor. Seal it with some more tape. For some reason, electric ignitors work best. Anyhow, you need to seal the tube so the 4F acts like a booster charge to launch the rocket. Yes, there was some recoil. We made special rockets for this. Three thin cardboard strips were the guidance for the rocket. |
|
|
Wicks work.
|
||
|
A brass rod works well. A C also has plenty of space for BB's that are ejected by the parachute charge. If you use a staging motor, a nice charge of powder will produce an excellent bang.
|
|
had a supply of engines but got tired of chasing them... glued fins on the outside of the body- straw and made a nose cone- flew damn far.. scrape clay off top and fill with 4f for some more fun...
roth |
|
OOohh...I like the way you think. All I have is 2f on hand though.
|
|
|
Video it cause you will be on America's Funniest Video competing for $10,000.00
And will be laughing OAO. |
|
sig line material right there, noobie..... |
|
|
Did it all the time, glue a marble over the end and slap a 24"dowel on the side & light it off.
|
|
I treid that when I was 12. I taped one to a wooden yard stick and launched it out of my bedroom window. It flew up a little ways then down into the vacant lot across the street from our house. It then ignited the dry grass where it landed.
I grabbed a bucked of water ran over to try to put it out, by then it spread in a circle about 10 feet wide. One of the neighbor came running over with his door mat and started beating it out. We finally got it put out. He gave me a long lecture about playing with illegal fireworks. Hell of a way to meet the neighbors. We had only been living there for 3 weeks. |
|
Here is what I have done:
1.Make nozzle larger 2. Insert cannon fuse 3. Insert into launcher (PVC tube) 4. FIRE IN THE HOLE I did this in the middle of town and no complaints, I did start a pile of pine needles on fire though. |
|
Been there, done that.
We used to make missiles out of them. I didn't use streamers. Much easier to find if you just glued the nosecone on. The'd just drive themselves into the ground. |
|
I know there's something fun to be done with this engine and some Tannerite . . .
|
|
done it tons of times . tape a #12 onto a dowl and tape a bunch of other fire works onto it interconnecting the fuses and light that sucker . 688 |
|
|
+1 They tend to arc over and crash into roofs while still in full burn and hot enough to instantly ignite petroleum based roof components. Dont ask me how I know! |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.