User Panel
Posted: 10/5/2014 10:42:48 PM EDT
Who has one? GD approved?
|
|
Don't know if it's GD approved, but I have shot and liked it. Plan to buy one if I ever get a good deal on a used one.
|
|
Get ready for the hate
They are fine handguns, accurate,reliable, etc |
|
Don't own one, but I've shot one. As a user of GD, I approve.
|
|
I used to own one (and a 92), but I shoot my Sigs a lot better, so I sold the 92 and 96 (still have a Cougar). I never had a malfunction with any of them. If you want a 96, try to find one with the heavier Brigadier slide, if you plan to shoot it a lot. They added more metal to the slide area near the locking block to strengthen it.
|
|
|
Quoted:
I have a 96 Compact and like it a whole lot more than I thought I would. They tend to be under sprung from the factory, so keep up with spring changes. View Quote For some reason, Beretta used the same 13 pound spring on the 92 and 96. A 96 will function perfectly with a 16 pound spring, with less wear on the pistol. |
|
They work fine, but they don't have the life expectancy of the 9mm models.
Several of my Berettas started out as .40s and I added a 9mm top end so I can shoot both rounds out of the same gun.
|
|
I don't like emasculated 10mm crap.
Posted Via AR15.Com Mobile |
|
I love my 92's. 1000 times better then any poly gun.
96 should be just as good. |
|
|
|
I'm not that much of a .40 fan and you give up a lot of capacity when you jump from the 92 to the 96. That being said I'm not a huge 92 fan either. I own one, its alright, hasn't been out of the safe in probably 2 years, it's far from my favorite.
|
|
I had one, absolutely loved it other than the grip size, I couldn't make it malfunction.
I ended up trading it in favor of something with a smaller grip but I miss it. |
|
I own a 96 and it is very accurate. Never have had a malfunction of any kind. All of those 40 s make me feel safe.
|
|
I've got two.
David Olhasso's Beretta Site www.olhasso.com/PS/index.htm built me one for uspsa |
|
Between steel challenge/IDPA/USPSA matches, one of my Brig 96 Inox's has ...probably...about 30,000 rounds through it. Well, actually the frame probably has that much. I put a D spring in the original .40 frame.
Then I bought a 92 Brig Inox. Instead of moving the D spring to the 92 frame, I slid the .40 top end off the 96 frame and then put the 9mm barrel and slide onto that. As one poster mentioned above, yes, a factory 96 with factory .40 ammo seems under-sprung. The empty shells/casings would get flung like 10 yards behind me and to the right. The spectators, my fellow squad members, would get hit with brass, and every now and then I would hear them make comments. It was kinda funny actually. |
|
I had one in the mid 90's...A G model like ISP back then. It was accurate and reliable but big for what you got which was 11 rounds if you could even find them. It did have a parkay smooooooth trigger. ..
|
|
Flush fit Mecgars for the 92s are 18 rounds, and Wilson Combat now makes parts and services Berettas. How does that sound?
|
|
Beretta 90 series pistols are fantastic guns. They're not perfect for everyone, but they are great weapons.
|
|
|
I bought the 9mm mags for the 92 from MecGar that hold 20 rounds of 9mm.
They work reliably with .40 and hold 15 or 16 rounds. |
|
Quoted:
92/96 Beretta's runs better than 98 mustang View Quote View All Quotes View All Quotes Quoted:
Quoted:
Flush fit Mecgars for the 92s are 18 rounds, and Wilson Combat now makes parts and services Berettas. How does that sound? 92/96 Beretta's runs better than 98 mustang I guess that depends on what the prior owners of the Beretta were addicted to at the time. Oh wait, then they wouldn't be able to answer the 4473. |
|
I was issued a 96D back in the day. Not my go to gun, but it worked, period.
|
|
|
Quoted:
I used to own one (and a 92), but I shoot my Sigs a lot better, so I sold the 92 and 96 (still have a Cougar). I never had a malfunction with any of them. If you want a 96, try to find one with the heavier Brigadier slide, if you plan to shoot it a lot. They added more metal to the slide area near the locking block to strengthen it. View Quote This. I've never owned one, but a buddy had a brigadier model and it was one of the sweetest shooting .40s I've ever shot. I've shot the other models and they just don't feel as nice. I think the slightly heavier slide does a good job of slowing down the recoil just a bit. |
|
|
Quoted:
This. I've never owned one, but a buddy had a brigadier model and it was one of the sweetest shooting .40s I've ever shot. I've shot the other models and they just don't feel as nice. I think the slightly heavier slide does a good job of slowing down the recoil just a bit. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I used to own one (and a 92), but I shoot my Sigs a lot better, so I sold the 92 and 96 (still have a Cougar). I never had a malfunction with any of them. If you want a 96, try to find one with the heavier Brigadier slide, if you plan to shoot it a lot. They added more metal to the slide area near the locking block to strengthen it. This. I've never owned one, but a buddy had a brigadier model and it was one of the sweetest shooting .40s I've ever shot. I've shot the other models and they just don't feel as nice. I think the slightly heavier slide does a good job of slowing down the recoil just a bit. I own both but to me the biggest bonus is the interchangeable front sight! |
|
Quoted:
Do they have problems with cracked slides? View Quote View All Quotes View All Quotes Quoted:
Quoted:
They work fine, but they don't have the life expectancy of the 9mm models. Several of my Berettas started out as .40s and I added a 9mm top end so I can shoot both rounds out of the same gun. Do they have problems with cracked slides? Not mine and after cracking two Sig 226's and one 1911 you'd think I would've done it be now if it was going to happen. |
|
I was issued a 96D, I believe it was the Centurion. It was a fine shooting pistol. I carried it on duty for 6-7 years, and shot quarterly qualifications without ever having one jam or malfunction. I'd guess I had more than a few thousand rounds through it. My pistol was replaced by an H&K USP Compact, and while it's smaller and lighter / better for concealed carry, I've never been able to shoot it as accurately as the Burrito.
I'd say if you can get one at a decent price, FO! |
|
Quoted: Do they have problems with cracked slides? View Quote View All Quotes View All Quotes Quoted: Quoted: They work fine, but they don't have the life expectancy of the 9mm models. Several of my Berettas started out as .40s and I added a 9mm top end so I can shoot both rounds out of the same gun. Do they have problems with cracked slides? |
|
I had one, worked fine. I actually shot it and the one I had in 9mm reasonably well. Never fell in love with either the 40 or the 9mm version for some reason, so I moved them down the road. Sometimes I think I should have kept one of them for a range toy.
|
|
I have a police trade in 96 that I got for $200. It was the only DA/SA one in a pile of DAO, plenty of bare spots on the finish but shoots great. I took it to the TX CHL qualification course (50 rounds) where some of the younger guys were joking on my "antique" until I put all of my shots into a ragged hole in the middle of the target. Its a good pistol that I'm not worried about getting dirty.
|
|
Quoted:
I built one form a 92 lower and 96g upper. <a href="http://s101.photobucket.com/user/nfe6848m/media/Beretta_Kova_Uploadl.jpg.html" target="_blank">http://i101.photobucket.com/albums/m54/nfe6848m/Beretta_Kova_Uploadl.jpg</a> Runs 100% View Quote I find this interesting. What specifically did you have to do to it? Just slap on a 96 slide/barrel? Can you go back and forth between the 92 and 96 interchangeably? |
|
Quoted:
I find this interesting. What specifically did you have to do to it? Just slap on a 96 slide/barrel? Can you go back and forth between the 92 and 96 interchangeably? View Quote View All Quotes View All Quotes Quoted:
Quoted:
I built one form a 92 lower and 96g upper. <a href="http://s101.photobucket.com/user/nfe6848m/media/Beretta_Kova_Uploadl.jpg.html" target="_blank">http://i101.photobucket.com/albums/m54/nfe6848m/Beretta_Kova_Uploadl.jpg</a> Runs 100% I find this interesting. What specifically did you have to do to it? Just slap on a 96 slide/barrel? Can you go back and forth between the 92 and 96 interchangeably? Long answer: The 96 uses a different ejector than the 92, and the frame also has a wider feed ramp to accommodate the .40 cal round. Short answer: None of that shit seems to matter, I've always been able to swap a 96 upper on a 92, or a 92 upper onto a 96, with no ill effects. ETA: You can even get away with just swapping in a 9mm barrel into a 96 slide. Wouldn't do this for a carry pistol, obviously. |
|
I had one a few years ago, nice guns, I am sort of partial to the Beretta design though because it seems to fit my hand well so I shoot it better, swapped it off(would buy another if a deal came along) still own a 92.
|
|
Quoted:
Long answer: The 96 uses a different ejector than the 92, and the frame also has a wider feed ramp to accommodate the .40 cal round. Short answer: None of that shit seems to matter, I've always been able to swap a 96 upper on a 92, or a 92 upper onto a 96, with no ill effects. ETA: You can even get away with just swapping in a 9mm barrel into a 96 slide. Wouldn't do this for a carry pistol, obviously. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
I built one form a 92 lower and 96g upper. <a href="http://s101.photobucket.com/user/nfe6848m/media/Beretta_Kova_Uploadl.jpg.html" target="_blank">http://i101.photobucket.com/albums/m54/nfe6848m/Beretta_Kova_Uploadl.jpg</a> Runs 100% I find this interesting. What specifically did you have to do to it? Just slap on a 96 slide/barrel? Can you go back and forth between the 92 and 96 interchangeably? Long answer: The 96 uses a different ejector than the 92, and the frame also has a wider feed ramp to accommodate the .40 cal round. Short answer: None of that shit seems to matter, I've always been able to swap a 96 upper on a 92, or a 92 upper onto a 96, with no ill effects. ETA: You can even get away with just swapping in a 9mm barrel into a 96 slide. Wouldn't do this for a carry pistol, obviously. I use an Inox 92FS top end on my 96G and an Inox Vertec 92FS top end on my 96G Vertec with no issues. I also have been known to slide a 9mm barrel into my 96G Elite II on occasion and it seems to work just fine. I started with .40 frames for my conversions but know plenty of others that have done the opposite with no problems. eta: I have mostly 10 and 11 round magazines for the .40s, but I also have some Mecgar 13 round magazines that work fine, but feel like they drag a bit when removing them from the gun while loaded. I need to go a head and grab some of the newer 12 round magazines one of these days. |
|
I dont have a 96, but i have a 92A1 and I love it. Accurate and reliable.
Though I do get some weird looks from people when I shoot 3Gun with it |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.