User Panel
User Panel
User Panel
|
Posted: 10/1/2016 2:41:39 PM EDT
[Last Edit: Jday]
Well boys, we let the old truck thread slip into the archive, so I figured I would start a new one. Maybe we can have this one pinned.
Original Thread: http://www.ar15.com/forums/t_1_134/1273476__ARCHIVED_THREAD____TRUCK_PHOTO_THREAD_post_them_up__show_off_your_trucks_.html&page=1 My 2015 High Country Duramax 
|
|
|
|
|
Posted: 3/25/2018 2:54:26 AM EDT
[#1]
2015 Ram 2500 with the 6.4L. Bought it in November and it gave me something to do over the winter after we got done combining. Started out as a salvage pickup out of Colorado with blown front airbags/seat belts, a wrecked box, pushed in fuel tank, dented drive shaft and a dented rear cab corner.
I did all the work myself except the body work on the cab corner and bedliner below the style lines on the doors and cab corners. Tore the interior apart to replace the seat belts, airbag sensors, controller, air bags (which require a new dash for the passenger bag), steering column, etc. Replaced the drive shaft with a salvage unit. I was able to drain the fuel tank and heat the plastic tank with a heat gun and just reach in and pop it back out. Replaced some blown out brake lines and the broken vapor canister. Took the box and rear hitch off and replaced it with a CM skirted flat bed. Replaced the headlights with projectors and LED bulbs. Added clearance lamps on the roof. Replaced the stock muffler with a Mufflex unit. Dropped in a cold air intake. New Fuel Vapor rims (it had 3 discontinued rims with it, and 2 stock steel rims, so I figured I'd spend a bit more and get something I liked). I just replaced the grille with a black aftermarket unit and ordered a Bodyguard T2 Extreme bumper/grille guard. Its also sporting new wheel to wheel running boards that fit under the flat bed skirt so I have a better step than what's available with the flat bed. I also have a few LED off road lights that'll end up on the bumper and flat bed. It's been a fun project and saved quite a bit of cash as well. I've got some before and during photos if anyone's interested. Mainly of the unholy mess behind the dash and creating a subframe for the flatbed to clear the gooseneck plate on the pickup.  Attached File |
|
|
|
|
Posted: 3/30/2018 4:45:05 PM EDT
[#2]
|
|
|
|
|
Posted: 3/30/2018 5:03:53 PM EDT
[#3]
2013 F-150 with 3.5L EcoBoost
|
|
|
|
|
Posted: 3/30/2018 5:38:33 PM EDT
[Last Edit: fulautotank]
[#4]
2017 Denali Ultimate with 6.2
|
|
|
|
|
Posted: 3/30/2018 6:32:40 PM EDT
[#5]
|
|
|
|
|
Posted: 4/2/2018 8:35:34 PM EDT
[#6]
|
|
|
|
|
Posted: 4/5/2018 9:12:47 PM EDT
[Last Edit: Pavelow16478]
[#7]
Recently went from an F250 brodozer to an F150. Loving the new King Ranch!
 Attached FileGot Husky wheel well liners and front mudflaps on tonight. Still need to do the rears.  Attached File Attached File Attached File |
|
|
|
GA, USA
|
Posted: 4/11/2018 7:44:22 PM EDT
[Last Edit: kaizer27]
[#8]
Quote HistoryOriginally Posted By Pavelow16478:
Recently went from an F250 brodozer to an F150. Loving the new King Ranch! https://www.AR15.Com/media/mediaFiles/86377/B27007BB-8CDB-4F02-B8DB-5621E5E978C8-505857.JPG Got Husky wheel well liners and front mudflaps on tonight. Still need to do the tears. https://www.AR15.Com/media/mediaFiles/86377/DD13A90F-1DB7-4230-9C22-00EC7DD0FF61-505861.JPG https://www.AR15.Com/media/mediaFiles/86377/B486334D-6C06-4306-9CAB-3E8F13510C17-505863.JPG https://www.AR15.Com/media/mediaFiles/86377/0CD380E2-4A0E-480E-9B83-CD3B73251D7C-505864.JPG love that color btw |
|
|
|
Posted: 4/11/2018 8:01:48 PM EDT
[#9]
Quote HistoryOriginally Posted By kaizer27:
Nice! I traded in my 1794 Tundra last month on a KR F150, love it so far. love that color btw 
Congrats on the KR! |
|
|
|
|
Posted: 4/12/2018 6:51:46 PM EDT
[#10]
|
|
|
|
USA
|
Posted: 4/15/2018 10:00:42 PM EDT
[#11]
Quote HistoryOriginally Posted By kaizer27:
Nice! I traded in my 1794 Tundra last month on a KR F150, love it so far. love that color btw |
|
|
CO, USA
|
Posted: 4/19/2018 2:17:19 AM EDT
[Last Edit: micah360]
[#12]
Just finished up the bedliner (that was almost worse than the wrap).
1989 Toyota 4x4 pick-up |
|
|
|
Posted: 4/21/2018 7:43:56 PM EDT
[#13]
Just got the spring cleaning done. Took most of the day to clay bar, buff and wax her.
 Attached File |
|
|
|
|
Posted: 4/22/2018 1:25:33 AM EDT
[#14]
2017 Ram 1500 Tradesman 4x4 / 5.7 / 8spd / Edge Pulsar Tuner
Pro Comp 6" lift & 85 Series Vapor Pro 2s / 35x12.5x20 Mastercraft Courser MXTs 
|
|
|
|
|
Posted: 4/30/2018 12:23:55 AM EDT
[Last Edit: Dangus]
[#15]
|
|
|
|
|
Posted: 5/16/2018 12:45:54 AM EDT
[#16]
08 f450 project truck. Not completely sure what the project will be, but I've got a few ideas rolling around
 Attached File |
|
|
|
|
Posted: 5/24/2018 8:40:27 PM EDT
[#17]
Put the ford to work last weekend. Not much compared to many here but it's about as heavy as I'll probably ever tow.
 Attached File |
|
|
|
|
Posted: 5/24/2018 8:41:50 PM EDT
[#18]
Quote HistoryOriginally Posted By MrHiggs:
Put the ford to work last weekend. Not much compared to many here but it's about as heavy as I'll probably ever tow. https://www.AR15.Com/media/mediaFiles/368298/2A7D4869-BAAA-445A-930F-FA578EABB215-554439.JPG |
|
|
|
|
Posted: 5/24/2018 8:49:52 PM EDT
[#19]
Just got it on monday
2018, 2.7 EB XLT 
|
|
|
|
|
Posted: 5/24/2018 8:58:25 PM EDT
[#20]
Quote HistoryOriginally Posted By Pavelow16478:
Nice truck! Don't see too many super crews with the 6.5' bed. Quote HistoryOriginally Posted By Pavelow16478:
Originally Posted By MrHiggs:
Put the ford to work last weekend. Not much compared to many here but it's about as heavy as I'll probably ever tow. https://www.AR15.Com/media/mediaFiles/368298/2A7D4869-BAAA-445A-930F-FA578EABB215-554439.JPG
|
|
|
|
|
Posted: 5/24/2018 9:00:12 PM EDT
[#21]
Quote HistoryOriginally Posted By MrHiggs:
Yeah, I knew I wanted the longer bed, but not sure I really needed it now. At 157" wheelbase, it's a bitch to park |
|
|
|
|
Posted: 5/24/2018 9:04:22 PM EDT
[#22]
F450.... at four corners last summer.
|
|
|
|
HI, USA
|
Posted: 5/27/2018 3:12:31 AM EDT
[#23]
|
|
|
|
Posted: 5/28/2018 10:18:03 AM EDT
[#24]
Quote HistoryOriginally Posted By BisonWorld:
08 f450 project truck. Not completely sure what the project will be, but I've got a few ideas rolling around
https://www.AR15.Com/media/mediaFiles/299270/15KpJKzP-660828558-545309.JPG |
|
|
|
|
Posted: 5/28/2018 11:10:52 AM EDT
[Last Edit: BisonWorld]
[#25]
Quote HistoryOriginally Posted By Countryboycarter87: I kind of like it the way it is. Looks tough and handy. Nice truck. |
|
|
|
|
Posted: 5/30/2018 9:14:50 PM EDT
[#26]
Quote HistoryOriginally Posted By booxr:
https://www.AR15.Com/media/mediaFiles/380970/IMG-20160821-125845692-111218.JPG More pics of that pretty black reg cab please!! 
|
|
|
|
|
Posted: 6/9/2018 8:28:46 AM EDT
[#27]
Quote HistoryOriginally Posted By Versatile435:
2015 Ram 2500 with the 6.4L. Bought it in November and it gave me something to do over the winter after we got done combining. Started out as a salvage pickup out of Colorado with blown front airbags/seat belts, a wrecked box, pushed in fuel tank, dented drive shaft and a dented rear cab corner. I did all the work myself except the body work on the cab corner and bedliner below the style lines on the doors and cab corners. Tore the interior apart to replace the seat belts, airbag sensors, controller, air bags (which require a new dash for the passenger bag), steering column, etc. Replaced the drive shaft with a salvage unit. I was able to drain the fuel tank and heat the plastic tank with a heat gun and just reach in and pop it back out. Replaced some blown out brake lines and the broken vapor canister. Took the box and rear hitch off and replaced it with a CM skirted flat bed. Replaced the headlights with projectors and LED bulbs. Added clearance lamps on the roof. Replaced the stock muffler with a Mufflex unit. Dropped in a cold air intake. New Fuel Vapor rims (it had 3 discontinued rims with it, and 2 stock steel rims, so I figured I'd spend a bit more and get something I liked). I just replaced the grille with a black aftermarket unit and ordered a Bodyguard T2 Extreme bumper/grille guard. Its also sporting new wheel to wheel running boards that fit under the flat bed skirt so I have a better step than what's available with the flat bed. I also have a few LED off road lights that'll end up on the bumper and flat bed. It's been a fun project and saved quite a bit of cash as well. I've got some before and during photos if anyone's interested. Mainly of the unholy mess behind the dash and creating a subframe for the flatbed to clear the gooseneck plate on the pickup. https://www.AR15.Com/media/mediaFiles/438569/IMG_20180310_101531-493356.JPG |
|
|
|
|
Posted: 6/23/2018 10:00:22 PM EDT
[#28]
need to get some leveling bags, that trailer is pretty nose heavy |
|
|
|
|
Posted: 6/24/2018 8:05:45 PM EDT
[#29]
Quote HistoryOriginally Posted By Pavelow16478:
When I bought my 2018 F150 I was really wanting it and finally talked myself out of it and got the 5.5'. Glad I did! Get a shorter bed truck, get a trailer. Carry more, frees up your bed, and lets you turn it into lockable storage. |
|
|
|
IA, USA
|
Posted: 6/25/2018 6:30:31 PM EDT
[#30]
Truck doing truck stuff.
|
|
|
|
Posted: 6/25/2018 10:31:01 PM EDT
[#31]
Quote HistoryOriginally Posted By fla556guy:
The number of times I wish I had a longer bed is far lower than the number of times I was thankful I didn't. Get a shorter bed truck, get a trailer. Carry more, frees up your bed, and lets you turn it into lockable storage. |
|
|
|
|
Posted: 7/1/2018 10:02:58 PM EDT
[#32]
Quote HistoryOriginally Posted By Countryboycarter87:
@booxr More pics of that pretty black reg cab please!! Quote HistoryOriginally Posted By Countryboycarter87:
Originally Posted By booxr:
https://www.AR15.Com/media/mediaFiles/380970/IMG-20160821-125845692-111218.JPG More pics of that pretty black reg cab please!! 
|
|
|
|
|
Posted: 7/7/2018 7:02:19 AM EDT
[#33]
I miss my Mustang dearly but man do Iove this truck
|
|
|
|
|
Posted: 7/9/2018 11:15:07 AM EDT
[#34]
|
|
|
|
|
Posted: 7/19/2018 10:08:51 AM EDT
[#35]
|
|
|
|
|
Posted: 7/20/2018 9:32:22 AM EDT
[#36]
1959 F-100 Project truck. I am planning a resto-Mod to it. My late grandpa bought it new in ‘59 when dad was born.
It has a 1960 or ‘61 tailgate on it and possibly a 289 from a Mercury Cougar. Either that or he had problems with the original valve covers, they’re stamped Mercury. The driver’s side exhaust header wraps around the front of the block and meets with the passenger side.  Attached File |
|
|
|
|
Posted: 7/22/2018 8:56:55 AM EDT
[#37]
|
|
|
|
|
Posted: 7/22/2018 4:07:17 PM EDT
[#38]
Quote HistoryOriginally Posted By Jday:
Traded the High Country in on a 2018 F250 last night. We'll see how it goes... https://www.AR15.Com/media/mediaFiles/230525/3C45DA24-A6BE-443D-B334-D3073569069D-615744.JPG
|
|
|
|
|
Posted: 7/22/2018 4:10:26 PM EDT
[Last Edit: Cpatterson]
[#39]
2018 Crew cab
pre black bowties 
|
|
|
|
IA, USA
|
Posted: 7/23/2018 10:32:22 PM EDT
[#40]
I did a thing this Saturday.
No more double cab and 5.3.
|
|
|
IA, USA
|
Posted: 7/24/2018 3:38:09 PM EDT
[Last Edit: 85_Ranger4x4]
[#41]
I did a thing too last night
|
|
|
|
Posted: 7/24/2018 4:30:00 PM EDT
[#42]
|
|
|
|
|
Posted: 7/25/2018 9:34:43 PM EDT
[#43]
|
|
|
|
|
Posted: 7/26/2018 9:19:28 PM EDT
[Last Edit: Jday]
[#44]
Two hundred miles in. Got maxed out on tint today (5% rears, sunroof, brow, 25% fronts). Next is leveling kit and 35s (or 37s?). Ranch Hands front and rear as funds allow.
 Attached File |
|
|
|
|
Posted: 7/26/2018 9:24:13 PM EDT
[#45]
|
|
|
|
|
Posted: 7/26/2018 9:43:37 PM EDT
[Last Edit: Jday]
[#46]
Quote HistoryOriginally Posted By housewolf:
https://www.AR15.Com/media/mediaFiles/177202/E421E8A0-9CA5-4594-983C-46DC4604C2AD-620418.JPG |
|
|
|
|
Posted: 7/28/2018 11:31:00 AM EDT
[#47]
Quote HistoryOriginally Posted By TX03RUBI:
https://www.AR15.Com/media/mediaFiles/214288/57621965-0D7B-440A-BCBB-5E878C3457C2-618109.JPGhttps://www.AR15.Com/media/mediaFiles/214288/C7B0EE25-3185-4C2B-AA9B-EEC8B7A0E2B9-618110.JPGhttps://www.AR15.Com/media/mediaFiles/214288/6B729B83-C4CE-4A4D-9756-C210F88E7C07-618112.JPG |
|
|
|
VA, USA
|
Posted: 7/28/2018 7:05:35 PM EDT
[#48]
Our 2017 Tacoma
|
|
|
|
Posted: 7/30/2018 9:21:29 PM EDT
[#49]
    
|
|
|
|
|
Posted: 7/30/2018 10:53:26 PM EDT
[#50]
Quote HistoryOriginally Posted By Jday:
What level and tire size are you running? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File