Posted: 1/11/2007 9:04:14 AM EDT
|
The Branson Comp is cheap and looks quite like an A2, however, are its dimensions a no-go? Read that it can accept rifle grenades? If so, are there any cheap modifications that can fix it? I just can't see spending $50 on a KKF or EGW A2 look-a-like when the Branson is $25 linky to brake |
|
The gernade luncher/mount fitting over the brake issue doesn't violate NYS law. The issue is the threaded barrel that you'll need to have to have that brake installed. You have to make sure that the brake is welded on so it can't be removed. From what I've been hearing, even though the bake is welded on the barrel is still threaded so you could have a problem later on but it's very unlikely it will ever become a issue. 1981 |
And that is the question, is the Branson Comp 22mm in OD? |
|
It looks like it's 22mm in OD. groups.msn.com/TheMarylandAR15ShootersSite/muzzledevices.msnw Branson Compensator DPMS Inc. An A2 look-alike muzzle brake. This one is intended for use on threaded barrels and can only be used on pre-ban rifles (due to its 22mm external diameter - it qualifies as a grenade launcher). It has a vent at the 12:00 position so it should do well at controlling muzzle rise - but it will also throw flash up into the line of sight. |