Posted: 7/30/2012 5:29:08 AM EDT
|
I just bought a set of ghost rocket trigger disconnect for both my G-19s and I dont have the small armors plate to do the install..
Anybody in or around the DFW willing to do the install for me for BEER... 
|
|
Just pull the slide till it locks back. Then use a precision screw driver or hex wrench to compress the striker spring/plunger assembly and remove the back plate. That gets the slide removed from the frame, then just reassemble
File down the disconector tab a bit and repeat as necessary. Re-Install in the pistol frame, re-assemble the gun. Takes really about 15min. |
|
Quoted:
Just pull the slide till it locks back. Then use a precision screw driver or hex wrench to compress the striker spring/plunger assembly and remove the back plate. That gets the slide removed from the frame, then just reassemble File down the disconector tab a bit and repeat as necessary. Re-Install in the pistol frame, re-assemble the gun. Takes really about 15min. I know all of that, but I don't have their orange peice for the back of the slide... Do I even need it or will it be a pain in the ass without it. |