Posted: 2/15/2013 7:23:19 AM EDT
|
So, if Magazine Bill A1329 Passes, which reduces Magazine Capacities from 15 to 10, how many of your Firearms will it affect and ball park dollar amount to replace existing ones ?
For me: 3 Handguns 1 AR $600-1000. 
|
|
I have a small boatload of XD45 13round mags.
I've come up with a plan to permanently alter them down to 10 if it becomes necessary before I depart the Glorious PRNJ. A rectangular piece of plastic, the same dimension as the inside of the mag, is cut at a specific angle top and bottom. That "spacer" is permanently epoxied to the flat plate that locks the sliding floorplate in place. The mag is still able to be disassembled for maintenance, but the spacer prevents the follower from dropping low enough to allow more than 10 rounds in the mag. I'm sure there's a similar solution for you Glock shooters |
|
Quoted:
I have a small boatload of XD45 13round mags. I've come up with a plan to permanently alter them down to 10 if it becomes necessary before I depart the Glorious PRNJ. A rectangular piece of plastic, the same dimension as the inside of the mag, is cut at a specific angle top and bottom. That "spacer" is permanently epoxied to the flat plate that locks the sliding floorplate in place. The mag is still able to be disassembled for maintenance, but the spacer prevents the follower from dropping low enough to allow more than 10 rounds in the mag. I'm sure there's a similar solution for you Glock shooters That is something I thought about, maybe for a couple of mags, but not all. My AR Mags were 10 rounders modified to 15, not sure if I can reverse them, epoxy is like rock 
|
|
Let's see...
35 AR-15 mags - $20 each 15 G3 mags - $40 each 13 M1A mags - $33 each 5 AR10 mags - $45 each 15 XD45 mags - $26 each 7 92FS mags - $16 each 3 FNP-45 mags - $50 each 5 SigP250 mags - $46 each 2 Sig226 mags - $23 each 1 GSG-5 mag - $17 each Hmmm, so that's... carry the 1... divide by Pi... $2,991. Plus tax. Not to mention... if the .50 ban passes, I'm out a $9K Barrett, a $1,500 S&W, a $1,700 Desert Eagle, and a $700 Beowulf. Assholes are looking to cost me around $15K. |
|
not many of mine. i have a single 14 rounder for my M&P 45 (the bump in the night gun). a single 15 rounder for the 92fs (had a bunch of 10's when the national ban was in place then got a single 15 for night time duty which is now replaced by the M&P) and 4 mags for the AR.
so 6 magazines. 2 of which would easily be sold online out of state and the 15 round AR ones i will probably have to sell for dirt cheap or just give em away to get rid of them. so i am probably $200 upside down on the deal. |
|
Quoted:
I have a small boatload of XD45 13round mags. I've come up with a plan to permanently alter them down to 10 if it becomes necessary before I depart the Glorious PRNJ. A rectangular piece of plastic, the same dimension as the inside of the mag, is cut at a specific angle top and bottom. That "spacer" is permanently epoxied to the flat plate that locks the sliding floorplate in place. The mag is still able to be disassembled for maintenance, but the spacer prevents the follower from dropping low enough to allow more than 10 rounds in the mag. I'm sure there's a similar solution for you Glock shooters I am NOT going to replace irreplaceable mags that will be fine somewhere in America. My contraband will leave and placed/shipped to a helping friend. |
|
Quoted:
Let's see... 35 AR-15 mags - $20 each 15 G3 mags - $40 each 13 M1A mags - $33 each 5 AR10 mags - $45 each 15 XD45 mags - $26 each 7 92FS mags - $16 each 3 FNP-45 mags - $50 each 5 SigP250 mags - $46 each 2 Sig226 mags - $23 each 1 GSG-5 mag - $17 each Hmmm, so that's... carry the 1... divide by Pi... $2,991. Plus tax. Not to mention... if the .50 ban passes, I'm out a $9K Barrett, a $1,500 S&W, a $1,700 Desert Eagle, and a $700 Beowulf. Assholes are looking to cost me around $15K. 
|
|
Quoted:
Quoted:
I have a small boatload of XD45 13round mags. I've come up with a plan to permanently alter them down to 10 if it becomes necessary before I depart the Glorious PRNJ. A rectangular piece of plastic, the same dimension as the inside of the mag, is cut at a specific angle top and bottom. That "spacer" is permanently epoxied to the flat plate that locks the sliding floorplate in place. The mag is still able to be disassembled for maintenance, but the spacer prevents the follower from dropping low enough to allow more than 10 rounds in the mag. I'm sure there's a similar solution for you Glock shooters I am NOT going to replace irreplaceable mags that will be fine somewhere in America. My contraband will leave and placed/shipped to a helping friend. Send all your mags to me! Oh, wait maybe not, CO is the new NJ. Mike |
|
Quoted:
Quoted:
Quoted:
I have a small boatload of XD45 13round mags. I've come up with a plan to permanently alter them down to 10 if it becomes necessary before I depart the Glorious PRNJ. A rectangular piece of plastic, the same dimension as the inside of the mag, is cut at a specific angle top and bottom. That "spacer" is permanently epoxied to the flat plate that locks the sliding floorplate in place. The mag is still able to be disassembled for maintenance, but the spacer prevents the follower from dropping low enough to allow more than 10 rounds in the mag. I'm sure there's a similar solution for you Glock shooters I am NOT going to replace irreplaceable mags that will be fine somewhere in America. My contraband will leave and placed/shipped to a helping friend. Send all your mags to me! Oh, wait maybe not, CO is the new NJ. Mike I heard the last vote - CO, the new NJ. WTF! |
|
Quoted:
Quoted:
Quoted:
I have a small boatload of XD45 13round mags. I've come up with a plan to permanently alter them down to 10 if it becomes necessary before I depart the Glorious PRNJ. A rectangular piece of plastic, the same dimension as the inside of the mag, is cut at a specific angle top and bottom. That "spacer" is permanently epoxied to the flat plate that locks the sliding floorplate in place. The mag is still able to be disassembled for maintenance, but the spacer prevents the follower from dropping low enough to allow more than 10 rounds in the mag. I'm sure there's a similar solution for you Glock shooters I am NOT going to replace irreplaceable mags that will be fine somewhere in America. My contraband will leave and placed/shipped to a helping friend. Send all your mags to me! Oh, wait maybe not, CO is the new NJ. Mike Damn, I am just speechless 
|
|
Quoted: FuckLet's see... 35 AR-15 mags - $20 each 15 G3 mags - $40 each 13 M1A mags - $33 each 5 AR10 mags - $45 each 15 XD45 mags - $26 each 7 92FS mags - $16 each 3 FNP-45 mags - $50 each 5 SigP250 mags - $46 each 2 Sig226 mags - $23 each 1 GSG-5 mag - $17 each Hmmm, so that's... carry the 1... divide by Pi... $2,991. Plus tax. Not to mention... if the .50 ban passes, I'm out a $9K Barrett, a $1,500 S&W, a $1,700 Desert Eagle, and a $700 Beowulf. Assholes are looking to cost me around $15K.  |
|
Quoted:
So, if Magazine Bill A1329 Passes, which reduces Magazine Capacities from 15 to 10, how many of your Firearms will it affect and ball park dollar amount to replace existing ones ? For me: 3 Handguns 1 AR $600-1000. 2 handguns..EVERY Semiauto rifle.... I have 24 Glock-19 magazines, 12 or so Ar 15's, 6 GSG-22 15's, 8 or 9 BDM Ar/22 conversion 15's I dont even want to THINK about what the replacement would be.. Actually replacement will cost nothing. i Will Not Comply...if i have to rent a storage locker in Pa for my mags until I can move, i'll do that |
Fuck Cuomo.