Quote History Quoted:
Not sure if you wrote your post correctly or not. It should close on a go but not close on a no go. If it doesn't close on the no go now I would just call it good especially if you will reload for it. Then you just have to adjust the resize die to fit the case to the chamber. If not then it isn't really an issue like many think.
View Quote
If it closes on a field gauge it will swallow a no go. He said he would like it to partially close on a no go or better, either would be safe. You can not fix headspace that bad with reloading, too much case will be unsupported.
Like was said CCA is your best local bet. It won't be a simple as just taking the shoulder back, the sights will still have to be indexed at 12:00 which will require a full turn, which means your chamber will need finish reamed because a full turn will set the headspace back about 1/12 of an inch, which will take it from failing a field gauge to not closing on a go gauge at all.