Dude I made my own. It aint too hard. All I did was disassemble the mag, removed the spring from the follower. Then I took a piece of scrap square tube steel, cut a slot in it on the port-o-ban, slid it on the little fin on the bottom of the follower, then trimmed it to only allow 5 rounds in it, then put a couple heavy tacks on it with a mig welder and reassembled. Works like a top. Just mark the outside with a 5 and you are golden. If you want I can make you a couple, I have plenty of mags. Total cost: $1.20 for an aluminum mag from Copes or is it $3 now, I dont know. |
