Posted: 5/8/2007 2:50:06 PM EDT
|
I have an full auto SP1 conversion and a Daniel Defense Large whole flat top Upper. I would like to get a decent barrel assembly for the upper that can take sustained full auto fire? I would like to keep the length to 16" or less. Any suggestions on Barrels? Should I go heavy or a barrel with flutes for heat dissipation? I would like to use it with my M42000, and a beta mag  Thanks! FNGfromGA out |
|
Colt 14.5" SOCOM barrel CMMG heavy barrel FWIW, I would just locate some decent used barrels on the EE and run those if you are going to be doing alot of mag dumps. Sustained automatic fire from an M16/M4 causes undue wear and higher temps which shorten the life of a barrel, hence why that role is left to SAW and M240 gunners. The two I mentioned are both very good barrels, and I have run them both in F/A. IIRC, CMMG makes the heavy profile in 16", 14.5", 11.5", and 10.3", so you have alot of options, and they are a good value. |