Posted: 5/4/2008 7:57:23 PM EDT
|
Anyone know a good gunsmith that will pin a low pro gas block on my AR? I'm in the St. Louis/St. Charles area. Thanks |
|
Thought about doing it yourself? It isn't that difficult. Just be sure the gas port is lined up and tap the pins in, use a brass drift for the last bit. BTW, you can't oush the FSB back too far, there is a shoulder there that will stop it. All you have to do is clock it correctly (I.E. the silly thing is pointing straight up). Use a vice and a level across the bottom of the upper reciever (Or the top if you have a flat top upper reciever). It really is easier that it would seem. |