Posted: 1/17/2015 2:56:31 PM EDT
|
Hi All,
I tried to drill a small hole, 3/16 inch, on my castle nut with my household drill and so-called titanium point drill bit from Home Depot and it really failed. Is there anyone who has a drill press and can help me with this? Or if you could tell me how to accomplish this that would great too. I live around High Rock area. Might as well ask it here too... Does anyone know where I can get car remote starters installed on my parents' 2002 Camry and 2004 Nissan Xterra for cheap? I asked couple shops and they quote me $250+ for each car. Thank you. |
|
I have a ergo grip f93 stock and it is too close to get the wrench out when it's tighten. It's even a bit closer than shown in the picture so I need to use the single hook wrench. Otherwise, it needs to be yanked out.
I can buy another stock and be done with it but I just don't want to give up. 
|
|
Quoted:
I think the issue is the portion that is attached to the tube can not be moved. The lower portion of the stock slides back and forward changing your LOP. You are correct. The top part cannot be moved and the hook is a little big for the spot therefore I need to drill. I got what I want. Thank you for your inputs guys! |