Posted: 11/27/2013 5:28:15 PM EDT
Is that drool I here dripping on the floor? I still gotta clock the FH but with the crush washer its almost 360 degrees of rotation, can that be correct? Its been a year of compiling parts and filing paperwork. OA preban lower that was an HBAR A2 I purchased for $900. I sold upper and accessories for $600. Troy MRF rail bought on sale for $130. TI-7 milspec stock, $34 open box on Amazon BCM Mod 0 PG $25 11.5" barrel from a vendor for Spikes Tactical $135 Young mfg ion bonded BC, FN bolt, $130 Aero precision upper receiver built by me, $90 complete Blemed Mod 4 CH $27 DD rear BUIS $50 Troy FDE front BUIS $70 Receiver extension, spring, H2 buffer $50 Aimpoint Comp M2 and LaRue CCO 68 $350 Not inexpensive but pretty good over all. Hope it goes bang. |
|
Quoted:
They make it in coyote I think but for the price I paid its nbfd. 300blk pistol upper and an SDN-6 about right? Quoted:
Quoted:
Hey congrats Cav! Lookin good, if you want everything to match try the tan camo rattle can paint from Walmart.  They make it in coyote I think but for the price I paid its nbfd. 300blk pistol upper and an SDN-6 about right? Gotcha, I thought you wanted it to match lol. ^ But that sounds about right! I'd love to do a 300BLK upper, but the ammo issue is what's holding me back. |
|
Quoted:
Gotcha, I thought you wanted it to match lol. ^ But that sounds about right! I'd love to do a 300BLK upper, but the ammo issue is what's holding me back. Quoted:
Quoted:
Quoted:
Hey congrats Cav! Lookin good, if you want everything to match try the tan camo rattle can paint from Walmart. They make it in coyote I think but for the price I paid its nbfd. 300blk pistol upper and an SDN-6 about right? Gotcha, I thought you wanted it to match lol. ^ But that sounds about right! I'd love to do a 300BLK upper, but the ammo issue is what's holding me back. Now that I keep thinking about it the color is starting to bother me.... Damn it 
|
|
Quoted:
Now that I keep thinking about it the color is starting to bother me.... Damn it
Quoted:
Quoted:
Quoted:
Quoted:
Hey congrats Cav! Lookin good, if you want everything to match try the tan camo rattle can paint from Walmart. They make it in coyote I think but for the price I paid its nbfd. 300blk pistol upper and an SDN-6 about right? Gotcha, I thought you wanted it to match lol. ^ But that sounds about right! I'd love to do a 300BLK upper, but the ammo issue is what's holding me back. Now that I keep thinking about it the color is starting to bother me.... Damn it
Haha me personally though, I like when the parts dont match |
|
Quoted:
Haha me personally though, I like when the parts dont match Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Hey congrats Cav! Lookin good, if you want everything to match try the tan camo rattle can paint from Walmart. They make it in coyote I think but for the price I paid its nbfd. 300blk pistol upper and an SDN-6 about right? Gotcha, I thought you wanted it to match lol. ^ But that sounds about right! I'd love to do a 300BLK upper, but the ammo issue is what's holding me back. Now that I keep thinking about it the color is starting to bother me.... Damn it
Haha me personally though, I like when the parts dont match Same here |
|
Looks like you got a barrel and flash hider with their start points as far away as possible. if it gets to tight at 360 you may need to trim the flash hider, find a thicker crush washer or try another flash hider.
Two crush washers may help but will look different 1/2-28 is .0357inch per turn i think its 28 pitch, i dont remember |
|
Quoted:
Looks like you got a barrel and flash hider with their start points as far away as possible. if it gets to tight at 360 you may need to trim the flash hider, find a thicker crush washer or try another flash hider. Two crush washers may help but will look different 1/2-28 is .0357inch per turn i think its 28 pitch, i dont remember Yes diameter is 1/2" thread pitch is 28 tpi. Milspec FH and crush washer, Spikes barrel, nothing oddball. I'll try to install it before I get wadded up drawers. Thanks for the input. |
|
Quoted:
Yes diameter is 1/2" thread pitch is 28 tpi. Milspec FH and crush washer, Spikes barrel, nothing oddball. I'll try to install it before I get wadded up drawers. Thanks for the input. Quoted:
Quoted:
Looks like you got a barrel and flash hider with their start points as far away as possible. if it gets to tight at 360 you may need to trim the flash hider, find a thicker crush washer or try another flash hider. Two crush washers may help but will look different 1/2-28 is .0357inch per turn i think its 28 pitch, i dont remember Yes diameter is 1/2" thread pitch is 28 tpi. Milspec FH and crush washer, Spikes barrel, nothing oddball. I'll try to install it before I get wadded up drawers. Thanks for the input. Spike's Barrel? Does it have the Converging Penises on it? Do you know what I am talking bout? |
|
Quoted:
Spike's Barrel? Does it have the Converging Penises on it? Do you know what I am talking bout? Quoted:
Quoted:
Quoted:
Looks like you got a barrel and flash hider with their start points as far away as possible. if it gets to tight at 360 you may need to trim the flash hider, find a thicker crush washer or try another flash hider. Two crush washers may help but will look different 1/2-28 is .0357inch per turn i think its 28 pitch, i dont remember Yes diameter is 1/2" thread pitch is 28 tpi. Milspec FH and crush washer, Spikes barrel, nothing oddball. I'll try to install it before I get wadded up drawers. Thanks for the input. Spike's Barrel? Does it have the Converging Penises on it? Do you know what I am talking bout? Thanks to Dan I do  and I can never look at spikes the same again....sadly my last stripped lower is a spikes... Haha
But Cav you can try prematurely crushing your crush washer. Pop it in a vise and squish it. Or just put it on the barrel and torque the FH down then back it off. Each time you do this you'll crush it a little more until eventually it'll be easily in range of tightening the FH down. |
|
What do you think,I'd love to do a 300BLK upper, but the ammo issue is what's holding me back.
http://goo.gl/MhX8nd |
|
Quoted:
Yes diameter is 1/2" thread pitch is 28 tpi. Milspec FH and crush washer, Spikes barrel, nothing oddball. I'll try to install it before I get wadded up drawers. Thanks for the input. Quoted:
Quoted:
Looks like you got a barrel and flash hider with their start points as far away as possible. if it gets to tight at 360 you may need to trim the flash hider, find a thicker crush washer or try another flash hider. Two crush washers may help but will look different 1/2-28 is .0357inch per turn i think its 28 pitch, i dont remember Yes diameter is 1/2" thread pitch is 28 tpi. Milspec FH and crush washer, Spikes barrel, nothing oddball. I'll try to install it before I get wadded up drawers. Thanks for the input. Speaking of which, did you ever find those BVD's? 
|