Posted: 11/25/2012 7:34:57 AM EDT
|
hi gang,
i installed some mepro, green green night sites on the g19. used the glockmeister install tool that made this job a 30 second job and totally painless. going to install some sights on my g26 and g21. if someone needs to borrow the tool, drop me a line. we can pass it around the forum if necessary. cl 
|
| where were you 6months ago, i used a wooden hammer, pliers, electrical tape for the TFO's on my g19, got it on eventually after 10min of hammering, did scrape some of the coating off the right side of the sights but sharpie covered it, imo sight tool is a nice one to have if you have multiple guns or an armory. |
|
Quoted:
where were you 6months ago, i used a wooden hammer, pliers, electrical tape for the TFO's on my g19, got it on eventually after 10min of hammering, did scrape some of the coating off the right side of the sights but sharpie covered it, imo sight tool is a nice one to have if you have multiple guns or an armory. i have been there. i try not to make the same mistake twice. i bought a sig sight tool as well so i'm covered for my pistols. cl |
|
Shop I hung out at bought the similar tool from Glock.
I am not sure if the guns vary or different sights vary or if it is just luck of the draw but some installs are easy peasy and some are a royal PITA Possibly the tool Glock provides is not as good as yours. My point it to not expect every install to go so simple . Thanks for the generous offer,I know these tools are not cheap |