Posted: 3/29/2010 11:49:29 AM EDT
|
Hi guys, I am buying a preban PWA rifle in an m16 configuration from someone in Arizona <thanks for the hookup>. i plan on removing the preban lower and replacing it with a new stag lower, and then i will make the upper ban compliant by removing the bayo lug and perma-attaching a muzzle brake. I will then sell the rifle as CT compliant. so my question is ... what muzzle brake/comp is the cheapest ... i dont need the best. thanks, -k |
|
JoJo's is my 2nd option at this point. its $100 for the brake and pin/weld job. i think i am going to go with a Cav Comp http://www.brownells.com/.aspx/pid=1464/Product/AR_15_CAV_COMP its already drilled for a pin and includes the pin. do you guys think i would have ANY problems at all with this? |
|
Quoted:
I thought it had to be permanent (welded). This is a crappy pic I took right when I picked mine up from Jojo's. http://usera.ImageCave.com/napachris/G10/IMG00179-20100311-1729.jpg You can pin it, as long as you weld over the pin, to prevent removal. |
|
Quoted:
Hi guys, I am buying a preban PWArifle in an m16 configuration from someone in Arizona <thanks forthe hookup>. i plan on removing the preban lower and replacing it with a new staglower, and then i will make the upper ban compliant by removing thebayo lug and perma-attaching a muzzle brake. I will then sell the rifleas CT compliant. so my question is ... what muzzle brake/comp is the cheapest ... i dont need the best. thanks, -k Bad ju-ju. You just posted your intention to purchase and manufacture firearms for resale (presumably w/o propper licensure) for the world to see. |
|
Yeah, I don't think there is any bad "ju-ju" here.
He is buying a preban rifle, and WHILE the upper it is still ON the preban he is modifying it. THEN and only then is he going to remove it from the preban to put the now "neutered" upper on his new post-ban Stag lower for the sale of a rifle he already owned, not manufactured. Right, kmanoni??? The upper is not a rifle, the lower is and since he already owns it, he is not manufacturing anything, just selling it |
|
Quoted:
just sell the upper on here or CTguntalk.com that's what i do with the preban upers i don't need and doesn't the Mfg this only apply if your making a lot? this should be ok, now if he was doing one a week then there might be an issue It applies if you are making with the intention to resell- whether be it 1 or 10000000. If you make it for yourself, that's one thing. Making/buying it to sell to somebody else is something else altogether. The upper is not a rifle, the lower is and since he already owns it, he is not manufacturing anything, just selling it
In the post, he implies that he is buying a new lower for this purpose. Maybe he wrote his post poorly (I have been guilty of that myself), BUT the way he wrote it raises eye balls. |
