Posted: 3/14/2011 9:09:10 PM EDT
| I was looking around the fox valley for a brass punch set. but i could only find a steel set that was full of punches that i didn't need. so were in the fox valley/green bay area can i find punches to build a AR lower. most specifically a brass set. i have the rest of the tools i need but the brass punch set is something i couldn't find at home depot,harbor freight or sears. any ideas? |
|
Quoted: I was looking around the fox valley for a brass punch set. but i could only find a steel set that was full of punches that i didn't need. so were in the fox valley/green bay area can i find punches to build a AR lower. most specifically a brass set. i have the rest of the tools i need but the brass punch set is something i couldn't find at home depot,harbor freight or sears. any ideas? The first one I did, I was excited and in a hurry ––- and believe I found Sears did in fact have a proper roll pin punch set (with the dimples) with 6 or 7 –– and on their web site you can check store availability –– but it ended up not being on the shelf as it said it was. If I recall correctly, I found them at Ace –– but this was a big Ace down here. I had tried other places –– harbor fright had punch sets but not the right kind. It was an entire day of searching for tools as I was going to do it that night. You want the right ones for sure. I am of the opinion you don't need a brass set. Of course, some of each would be good to have long term. Take your time, you'll be fine. If you have a Grainger up there, they may have them. |
|
Midway has punch sets.
Ive used a nail in the past when I couldnt find my punch. |
| A nail you say. i know i can get them from midway but i was hopeing to go to a store pick up the stuff and be done with it so i can go home and build. and if i cant find the brass punch i need i will jsut have to pick up the roll pin punch and wing it with what i can find |
|
Quoted: I was looking around the fox valley for a brass punch set. but i could only find a steel set that was full of punches that i didn't need. so were in the fox valley/green bay area can i find punches to build a AR lower. most specifically a brass set. i have the rest of the tools i need but the brass punch set is something i couldn't find at home depot,harbor freight or sears. any ideas? Did you try Fleet Farm? I know they have nice roll pin punch sets, but I am not 100% if they have brass ones or not. |
|
Look in your local phone book for a Mac Tools (I'm partial to them because I used to be a dealer...) or Snap On dealer. Or stop at your favorite mechanics shop and get the number from him. I used to carry individual and sets of brass punches on the truck - along with standard and roll-pin punches. Maybe you'll get lucky and he'll be working in your area or, if nothing else, you can make arrangements to catch up with him somewhere!
FYI, they'll probably be more expensive than mail order but at least you can pick them up right away! 
|