Posted: 1/5/2014 3:20:45 PM EDT
|
I just started to reload again after moving. All of my reloading stuff was in boxes and took everything out. Cleaned everything and lube where needed. I loaded LG pistol primer in the feeding tube and it failed to load the primer on the bar. Cleaned and adjusted the primer tube and it still failed to load primer took about 1/2 to get to work right. Then i loaded about 5 45acp round and checked them with the Dillon gage for proper fit but it would not fit. I double checked everythingand all was fine. Then I check the cast bullets and guess what? I never resized the cast bullets to .452, what a big mistake that was. I thought I resized alll of my casting before I put them away. A lesson learned and a waste of time, now I have to check all my brass and casting for proper fit. I have about in total in different caliber brass and lead bullets I mean thousands of them going to be very busy double checking it all. The mistake I made was not to labeling what was done. It's a lesson learned the hard way.
I have two Dillon 550B |
|
I'm sure there are plenty of reloaders in the PA forum, but you may get more feedback in the Reloading forum.
http://www.ar15.com/forums/f_6/42_Reloading.html |