Posted: 12/26/2014 5:50:08 PM EDT
| Any one know where I can get H-110 powder in town ? Just got brass and Missouri Bullet 240 grain EK Hightech solids and need the powder to load for 44 mag .FYI , anyone who has not tried these in a 44 mag is in for a big surprise ,no lead fouling and 75 to 100 fps faster . http://www.missouribullet.com/details.php?prodId=241&category=5&secondary=&keywords= |
|
Quoted:
Do you happen to know what exactly is their Hi-Tek 2 Extreme coating on these? Quoted:
Do you happen to know what exactly is their Hi-Tek 2 Extreme coating on these? From their FAQs: What is the Hi-Tek coating and how is it applied?
The coating is made in Australia and imported here. We are currently lining to up distribute this coating along with unsized/unlubed bullets so that folks can apply the coating themselves. The coating itself consists of a catalyst which binds a polymeric colorant agent with acetone which is then applied in bulk to raw bullets and baked onto the bullets' surface at nearly 400 degrees. The coating is a polymer (bonded with metal) and forms an extremely tough new surface for the bullet. The application of the coating is repeated for an additional coat. The bullets are then sized normally but not lubricated, as the coating itself acts as bullet lube. Nominal bullet diameter is not affected. I haven't used their coated stuff yet, but their standard bullets are great. I might need to try these for the cans... |