Armory Sponsor
[ARCHIVED THREAD] - New Omega Roller Lock Offerings (Page 1 of 2)
Posted: 5/21/2016 4:02:33 PM EDT
There is a new line of Roller lock offerings for those who are wanting a 922 R candidate for your SBR project or a host for your NFA full auto sear packs. They have an impressive list of quality parts and build specs and include pistols , rifles and barreled uppers .
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
|
|
All parts are supplied by Adam Webber @ HK Parts.net and there is a detailed parts list breakdown in the item listing .
Bolt head - TRUE MP5 F Styled bolt head. The first and ONLY true F spec bolt head with ALL of the latest German HK upgrades. 922R US Bolt carrier - True latest and greatest MP5 F tungsten fulled F/A spec bolt carrier. Setup and ready to go for registered sear packs or post sample host guns. 922R US Locking piece - 100 Degree true factory correct locking piece US Firing pin - Stainless steel firing pin for the utmost in corrosion resistance & durability US Firing pin spring- Stainless steel for the utmost in corrosion resistance & durability US |
| We also offer the Zenith line and they are an Excellent product . The Omega really is not meant to compete with the Zenith since the Zenith has a Sear block and is not set up to accept full auto sears. The Omega is 922R compliant right out of the box so you can build your [ SBR ] Short Barreled Rifle without having to spend more money buying US parts . They also have a full auto bolt carrier so those that have a NFA sear pack can use the gun as their host . The Omega series is meant to be another Option for the Roller lock shooter to choose from . |
|
Quoted:
All parts are supplied by Adam Webber @ HK Parts.net and there is a detailed parts list breakdown in the item listing . Bolt head - TRUE MP5 F Styled bolt head. The first and ONLY true F spec bolt head with ALL of the latest German HK upgrades. 922R US Bolt carrier - True latest and greatest MP5 F tungsten fulled F/A spec bolt carrier. Setup and ready to go for registered sear packs or post sample host guns. 922R US Locking piece - 100 Degree true factory correct locking piece US Firing pin - Stainless steel firing pin for the utmost in corrosion resistance & durability US Firing pin spring- Stainless steel for the utmost in corrosion resistance & durability US I don't see anywhere, where it says if the parts are RCM or parts from the latest iteration of a Bailey connected company. Can you provide more information? Over the years I've had to replace enough parts in Bailey made guns to find this is an essential piece of information! |
|
Quoted:
As stated earlier they are all supplied by HK Parts.net , They built the list of parts based on providing a solid gun with updated features and parts @ a reasonable price. They are producing parts and supplied all of the parts for the guns . I guess a more direct question would be: Does Todd Bailey have any involvement in these guns or the parts within them in any way? |
|
Quoted:
I guess a more direct question would be: Does Todd Bailey have any involvement in these guns or the parts within them in any way? Quoted:
Quoted:
As stated earlier they are all supplied by HK Parts.net , They built the list of parts based on providing a solid gun with updated features and parts @ a reasonable price. They are producing parts and supplied all of the parts for the guns . I guess a more direct question would be: Does Todd Bailey have any involvement in these guns or the parts within them in any way? FWIW I saw some posts on HK Pro a while back about a company named Omega that made roller locking guns to spec for specific companies. They were allegedly re branded Special Weapons as Wade Bailey answered emails and he's Todd's brother. |
| Yes Wade is Todds brother nothing new there .Just to be clear one more time All of the parts are supplied by Adam Webber @ HK Parts and have nothing to do with Special Weapons. There is nothing to hide we have laid it all out on the table, Parts from HK parts ,Build by Omega and Money back guarantee by Atlantic . |
|
Quoted:
Yes Wade is Todds brother nothing new there .Just to be clear one more time All of the parts are supplied by Adam Webber @ HK Parts and have nothing to do with Special Weapons. There is nothing to hide we have laid it all out on the table, Parts from HK parts ,Build by Omega and Money back guarantee by Atlantic . Thanks for the info. I have no doubt you guys stand behind your products, I've had a great experience with my MKE I bought from Atlantic. 
From your posts, it's clear that the components are all from HKParts, but the assembly is done by Omega. Omega employs Wade Bailey, therefore the question is on the table about Omega more than the components. |
|
Really nice new offering with a lot of model variety. Especially the barreled upper.
There's a video on the Atlantic site with a lot more information. The quality of the welding work looks extremely high to me. As if they were done on a CNC welder. And there's a 30 point checklist that they show in the video which should catch a lot of the "usual suspects" that seem to creep up. |
| Guys n Gals , We understand your concerns and that is why we have tried to lay it all of the details and make sure top quality parts were used from a Industry leader in the roller lock parts market from HK parts.net . Adam also had suggested Omega to build the firearms since their facility had been recently upgraded and Adam had personally visited the facility .We also made sure there was a stringent build / Quality control check list on each gun built. All of this coupled with Atlantic's reputation of being honest and standing behind our products , we are offering a 2 week take the gun out and shoot money back guarantee. |
|
Quoted:
Yes we are considering a Reverse Stretch model in the future Yes we are considering offering a SD barreled upper that would not include the suppressor . The customer could order the suppressor of their choice separate. well now you have my attention. I was going to turn my mp5 kit into an SD by swapping out the barrel and buying the heat shield/grip, but maybe I will wait. |
|
We need some lower priced Hk options. Options are nice anyway it goes but $800-$1000 range clones or at least uppers would be nicer and sell much more volume.
When I first saw this post about a new company making Hk clones I hoped to see lower prices and was disappointed when I saw prices even higher than POF and Zenith. Thanks anyway. |
|
Quoted:
We need some lower priced Hk options. Options are nice anyway it goes but $800-$1000 range clones or at least uppers would be nicer and sell much more volume. When I first saw this post about a new company making Hk clones I hoped to see lower prices and was disappointed when I saw prices even higher than POF and Zenith. Thanks anyway. I agree. The good thing is that the PTR guys essentially verified at NRAAM that they are working on a PTR 94. Admittedly, I asked expecting them to be far less open about the fact. |
| So that everyone is properly informed and not mislead in any way. The parts in these guns are not RCM. They are manufactured for HKparts.net by Brand X Machine Shop and Grill. Seems like Atlantic Arms would be happy to clarify the origin of the parts when asked. |
|
Quoted:
So that everyone is properly informed and not mislead in any way. The parts in these guns are not RCM. They are manufactured for HKparts.net by Brand X Machine Shop and Grill. Seems like Atlantic Arms would be happy to clarify the origin of the parts when asked. The K barrel is stamped RCM. I haven't dug any deeper yet. Update: The Barrel, Bolt Head, Front Sight Tower and Trunion are clearly marked RCM. The Locking Piece and Bolt Carrier do not have RCM markings that I could find based on the RCM part photos on HKparts.net. The extractor is a question mark. Based on the photos online, the RCM extractors are not marked. 
|
|
Quoted:
I agree. The good thing is that the PTR guys essentially verified at NRAAM that they are working on a PTR 94. Admittedly, I asked expecting them to be far less open about the fact. Quoted:
Quoted:
We need some lower priced Hk options. Options are nice anyway it goes but $800-$1000 range clones or at least uppers would be nicer and sell much more volume. When I first saw this post about a new company making Hk clones I hoped to see lower prices and was disappointed when I saw prices even higher than POF and Zenith. Thanks anyway. I agree. The good thing is that the PTR guys essentially verified at NRAAM that they are working on a PTR 94. Admittedly, I asked expecting them to be far less open about the fact. Seriously? If they're priced similar to their other products they're going to sell a shitload of them. (Including one to me) |
|
Quoted:
The K barrel is stamped RCM. I haven't dug any deeper yet. Update: The Barrel, Bolt Head, Front Sight Tower and Trunion are clearly marked RCM. The Locking Piece and Bolt Carrier do not have RCM markings that I could find based on the RCM part photos on HKparts.net. The extractor is a question mark. Based on the photos online, the RCM extractors are are not marked. http://s33.postimg.org/fwrnqp4jj/rcm.jpg Quoted:
Quoted:
So that everyone is properly informed and not mislead in any way. The parts in these guns are not RCM. They are manufactured for HKparts.net by Brand X Machine Shop and Grill. Seems like Atlantic Arms would be happy to clarify the origin of the parts when asked. The K barrel is stamped RCM. I haven't dug any deeper yet. Update: The Barrel, Bolt Head, Front Sight Tower and Trunion are clearly marked RCM. The Locking Piece and Bolt Carrier do not have RCM markings that I could find based on the RCM part photos on HKparts.net. The extractor is a question mark. Based on the photos online, the RCM extractors are are not marked. http://s33.postimg.org/fwrnqp4jj/rcm.jpg FWIW that barrel is marked as CHF while the barrel on the Omega from the Atlantic site is listed as button rifled. |
|
Quoted:
Seriously? If they're priced similar to their other products they're going to sell a shitload of them. (Including one to me) Quoted:
Quoted:
Quoted:
We need some lower priced Hk options. Options are nice anyway it goes but $800-$1000 range clones or at least uppers would be nicer and sell much more volume. When I first saw this post about a new company making Hk clones I hoped to see lower prices and was disappointed when I saw prices even higher than POF and Zenith. Thanks anyway. I agree. The good thing is that the PTR guys essentially verified at NRAAM that they are working on a PTR 94. Admittedly, I asked expecting them to be far less open about the fact. Seriously? If they're priced similar to their other products they're going to sell a shitload of them. (Including one to me) Yup. I asked point blank if we would ever see a PTR 94 and their response was "sooner than you might think." I then followed up with "will they be priced like other clones out there or in line with other PTR products?" Their response was "in line with our other products." |
|
Quoted:
Yup. I asked point blank if we would ever see a PTR 94 and their response was "sooner than you might think." I then followed up with "will they be priced like other clones out there or in line with other PTR products?" Their response was "in line with our other products." Quoted:
Quoted:
Quoted:
Quoted:
We need some lower priced Hk options. Options are nice anyway it goes but $800-$1000 range clones or at least uppers would be nicer and sell much more volume. When I first saw this post about a new company making Hk clones I hoped to see lower prices and was disappointed when I saw prices even higher than POF and Zenith. Thanks anyway. I agree. The good thing is that the PTR guys essentially verified at NRAAM that they are working on a PTR 94. Admittedly, I asked expecting them to be far less open about the fact. Seriously? If they're priced similar to their other products they're going to sell a shitload of them. (Including one to me) Yup. I asked point blank if we would ever see a PTR 94 and their response was "sooner than you might think." I then followed up with "will they be priced like other clones out there or in line with other PTR products?" Their response was "in line with our other products." Awesome |
|
Quoted:
Awesome Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
We need some lower priced Hk options. Options are nice anyway it goes but $800-$1000 range clones or at least uppers would be nicer and sell much more volume. When I first saw this post about a new company making Hk clones I hoped to see lower prices and was disappointed when I saw prices even higher than POF and Zenith. Thanks anyway. I agree. The good thing is that the PTR guys essentially verified at NRAAM that they are working on a PTR 94. Admittedly, I asked expecting them to be far less open about the fact. Seriously? If they're priced similar to their other products they're going to sell a shitload of them. (Including one to me) Yup. I asked point blank if we would ever see a PTR 94 and their response was "sooner than you might think." I then followed up with "will they be priced like other clones out there or in line with other PTR products?" Their response was "in line with our other products." Awesome I was told the same thing at shot show but was told they were keeping it secret still. The guy I talked to said the owner is a perfectionist, that they already finished guns and they worked great but wanted to really nail it before announcing it. |
|
Quoted:
I was told the same thing at shot show but was told they were keeping it secret still. The guy I talked to said the owner is a perfectionist, that they already finished guns and they worked great but wanted to really nail it before announcing it. Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
[ I agree. The good thing is that the PTR guys essentially verified at NRAAM that they are working on a PTR 94. Admittedly, I asked expecting them to be far less open about the fact. Seriously? If they're priced similar to their other products they're going to sell a shitload of them. (Including one to me) Yup. I asked point blank if we would ever see a PTR 94 and their response was "sooner than you might think." I then followed up with "will they be priced like other clones out there or in line with other PTR products?" Their response was "in line with our other products." Awesome I was told the same thing at shot show but was told they were keeping it secret still. The guy I talked to said the owner is a perfectionist, that they already finished guns and they worked great but wanted to really nail it before announcing it. Any guesstimates???? I MUST HAVE ONE lol awesome news nonetheless though |
|
I have to wonder if they're getting close because they said nothing to me about keeping it quiet. Had they done so, I certainly would have complied.
We need to get back to the Omegas though. With all those RCM parts, they should be very nice. In my experience, RCM parts give up little to nothing to factory/contract HK ones. |
|
Quoted:
We are having multiple request for a Reverse Stretch K pistol any thoughts on this ? We would also offer it a a upper. I think there would be plenty of interest. MKE doesn't make one, POF did, but I haven't seen one of those for sale for quite some time. Is there anyone else currently making one? |
|
Quoted:
We are having multiple request for a Reverse Stretch K pistol any thoughts on this ? We would also offer it a a upper. I think your question answers itself.
Personally I don't see the appeal of the reverse stretch, but a lot of people seem to want them. An SD offering as just the upper with no silencer would sell like crazy. |
|
The Barrel Specs as listed on our web site have not changed from day 1 and will not change on the next batch coming into us .
Barrel -8.85" Free floating button rifled 3-lugged & threaded 1/2 X 28 with ultra desirable "nitiride" plating inside and out for long life and unparalleled accuracy US 922R |
| I had a chance to get my Omega OM9K out to the range this weekend. It functioned flawlessly with Winchester 115 grain white box, Winchester 124 grain NATO, and Speer 147 grain Lawman both suppressed (YHM Wraith XL) and unsuppressed. I'm happy and can't wait for my stamp to get here. |
[ARCHIVED THREAD] - New Omega Roller Lock Offerings (Page 1 of 2)
Armory Sponsor