Armory Sponsor
Posted: 6/16/2004 4:26:15 AM EDT
| . |
|
You can find lots of useful CETME info on these sites: www.cetme.org/ www.cetmerifles.com/ |
|
Due to variations in receivers, including the majority Century steel stampings, either CETME or G3 mags may work, or both. MIne runs fine on SA/Port/Aussie surp, 2-2.5" on either. Heartily suggest Bill Springfield for trigger work. Take notepad, feeler gauges for headspace measurements, bore light, good eyes/hands for straight workmanship, be very willing to keep shopping till you find a keeper. A good chamber brush is mandatory. |
|
Another Tip - Unless you just like spending money on something you may or may not need, then MAKE a ruptured case extractor! This is too easy to do. Just take a fired case from your rifle, and cut off the base of the cartridge. The idea here is not to disturb to 'neck end' of the case. Then, go to the trusty workbench and find a lag bolt or screw that fits inside the case, but will not go thru the neck of the shell. Put it in your range bag with an appropriate socket and extension. My brother and I did this (out of desparation) and it worked just super. Now, all that you have to do when it happens (and it will) he GENTLY hen,HTH |
Armory Sponsor