Armory Sponsor
Posted: 6/27/2003 8:58:15 AM EDT
|
I'm trying to locate a thread where someone has a 3.5x ACOG on a FAL all I can find is this one www.ar15.com/forums/topic.html?b=3&f=18&t=156163&w=myTopicPop but I could have sworn someone else posted their rifle witht his same setup in the last month or so [?} Thanks! |
|
www.grsc.com has some on his website of the TA11 (3.5x32) ACOG along with a modified mount that he sells for the FAL / ACOG....If you are going to get an ACOG on a FAL I would highly recommend GRSC's mount... Hope this helps |
Thanks! that's what I was looking for. |
|
Kev, It's not my mount, I don't own one, but at one time I was considering putting a Trijicon TA11 ACOG on my DSA FAL. Basically the mount is a modified DSA scope mount held on my 8 screws and 4 locking plates. It would only take a minute to loosen up the screws and take the mount off. And yes you can use the iron sights with that set up. |
|
I have that setup on a FAL - works great. Very solid and low enough to get an adequate, if not real tight, cheekweld. Only difference is mine was made from the later DSA mounts with 10 screws and 5 locking plates. That TA11C spoils you for other sights/optics - too bad it is so pricey. Lloyd |
Armory Sponsor