Armory Sponsor
INOCULUM - LIMA SIX dedicated Lower (Page 13 of 15)
You Must Be Logged In To Vote
|
Originally Posted By jaqufrost: Y'all should add a receiver extension,spring and buffer kit to your webstore so it would be easy to purchase with the lower. Working on that now! We have the extensions, and we are testing a few different buffers. I have Odins, and Tromix already. Dan also spun up a custom spring, but I need to do more testing first. I would like to get to a point where it's everything for the entire lower as a "Short Block" kit. If we could ever get some lowers to come out of the shop that would be nice as well.... SLLOOOWWW!!! |
|
Originally Posted By jaqufrost: Finally ordered an IGM7 from y'all. Any rough estimate on how long the backorder wait is? I went ahead and bought a kit from LimaSix and ordered their buffer kit to go with the lower. Now I need to decide which trigger to put in it. Between 8 and 16 weeks. (My guess is 12) We have a new shop quoting it out, and I think it's going to be good all around. I suppose you will be waiting on the L6 parts anyhow. My goal is to have backlog cleared and lowers as a stocked item sometime in November if we can pull it off. Ryan |
|
Originally Posted By TZLVredmist: Ok that feels better. Will start packing and shipping in the AM! Going to take more time to do it though, I screwed up a couple orders last time trying to hurry! https://www.ar15.com/media/mediaFiles/47383/PXL_20260821_011350729-3814503.jpg Do I see order 5195 in this pile? |
Middleofnowhere, Nebraska
|
Originally Posted By Bayer: I asked earlier and never got a response, but I'm guessing these are not coming with the bolt hold open parts? They will yes, we made a material switch, so the catches are even further behind than the lowers. I want to send the lower now so people can use it with the standard catch while they wait. We will be sending the catches to customers free of charge of course at a later date. Ryan |
|
Originally Posted By rbhoover: Perfect timing  Got it all assembled today: https://i.imgur.com/FuU41Pr.jpeg Looks good… And light without the heat mitigation system underneath the handguard. |
|
Received my lower today. Everything looks good, fit and function, as for the upper and LPK is 100%. Finish is good. Has a few of those 'swirl' marks. I am not concerned with those. The only 'issue' is, my cloth nutsacks will not fit. Too tight. I'll look into taking some material off the sack later. I have some Cloak Industries 100rd plastic nutsacks. Those fit perfect. Attached File Attached File Thanks again for doing this project. |
|
Originally Posted By aod886: Received my lower today. Everything looks good, fit and function, as for the upper and LPK is 100%. Finish is good. Has a few of those 'swirl' marks. I am not concerned with those. The only 'issue' is, my cloth nutsacks will not fit. Too tight. I'll look into taking some material off the sack later. I have some Cloak Industries 100rd plastic nutsacks. Those fit perfect. https://www.ar15.com/media/mediaFiles/249712/20260824_171040_1__jpg-3816552.JPG https://www.ar15.com/media/mediaFiles/249712/20260824_180258_jpg-3816553.JPG Thanks again for doing this project. Looking good and a ARF serial number to boot 👍🏼 What brand are the cloth nutsacks? |
|
Might just need to give it one good shove to seat it in the plastic at the corners. That looks like possibly a Mil-Spec (Manufacturer?) Sack? Just checked a whole bunch on the bench with some tribe tactical, and those gross green plastic boxes and all good. Also we are having some issues with our FFL Plugin, so I can't download most of the FFLs. The company that makes it is working on it now, so shipping may be delayed on orders till I get access back. Hopefully tomorrow morning I can start shipping them again! Ryan ETA: I would look at this area first, I doubt it's the dovetail, it's most likely the plastic radius on the sack that is just kissing the lower. 
|
|
They are military surplus. I have three. All the same stoppage. I believe it is the area that's circled in red above. Attached File Attached File Attached File |
|
Lastly, the soft do fit on the regular AR lower magwell adapter. Attached File |
|
Originally Posted By aod886: Lastly, the soft do fit on the regular AR lower magwell adapter. https://www.ar15.com/media/mediaFiles/249712/20260824_202747_jpg-3816648.JPG Can you look down in the drop link chute and see how close it is to latching? |
|
A quote from @TonyRumore "The USGI ones are not all the same either. There are pretty big tolerance variations among them. It will be interesting to see how all the different boxes fit on the new Inoculum lower." Tony I probably need to figure out how to get my hands on one of these large USGI nutsacks (Hehe) just so we can understand the variation more. I have the UCP USGI versions and they all fit, but I imagine there are plenty of vendors who made them. |
|
Some more pictures of the USGI nutsack... Attached File Attached File Attached File Attached File Attached File Attached File And this is the only marking on my 'sack' 😉. Its "4C0001". All of mine are marked the same. Attached File |
|
Okay. After looking at it more, the cloth sack is pretty close to fitting. But not by hand. I gave it a few light to medium taps with a gun-smithing mallet, and it did seat. However its not coming off by hand. Requires the mallet. Attached File Attached File Attached File Either way. I hope this is informative to someone down the line. I think as far as what I have on hand, I'll stick with the box for now. |
|
Originally Posted By aod886: Okay. After looking at it more, the cloth sack is pretty close to fitting. But not by hand. I gave it a few light to medium taps with a gun-smithing mallet, and it did seat. However its not coming off by hand. Requires the mallet. https://www.ar15.com/media/mediaFiles/249712/20260825_181919_jpg-3817193.JPG https://www.ar15.com/media/mediaFiles/249712/20260825_181932_jpg-3817194.JPG https://www.ar15.com/media/mediaFiles/249712/20260825_182009_jpg-3817195.JPG Either way. I hope this is informative to someone down the line. I think as far as what I have on hand, I'll stick with the box for now. It's not hitting the trigger guard and binding is it? Almost looks like the plastic has warped. I need to get my hands on one of these. |
|
Originally Posted By TZLVredmist: It's not hitting the trigger guard and binding is it? Almost looks like the plastic has warped. I need to get my hands on one of these. Originally Posted By November5: It looks like exactly that to me, but pics can be deceiving. Here's what I have... The hard box. Attached File Soft. Attached File Attached File There does appear to be some rubbing. Attached File Attached File |
|
Originally Posted By swampfoxoutdoors: https://www.ar15.com/media/mediaFiles/424008/IMG_9386_jpeg-3817265.JPG  https://www.youtube.com/watch?v=0F_9ABWOxeISweet!!!! |
|
Originally Posted By AZ_Hi_Desert: My first lower gets here on Monday and Cody told me my RRH upper is close to shipping. This makes me very happy! Nice… Have a bunch of stuff sitting in the shelf for my RRH RPD, just waiting for me dedicated lower rather then adding it all to the poverty pony lower just to remove it all. |
|
Glad to see these landing for folks. A note on the "Mil-Spec" nut sacks. @tommyidone Got his lower and all 10 of his Mil-Spec sacks don't fit and he has confirmed that it's indeed the edge of the sacks contacting the trigger guard portion before getting a chance to fully seat in the dovetail. All the rest are good (Plastics, Cloak import, Tribe Tactical Etc.) I swapped out a tribe for the one that didn't fit earlier in the thread so I have hands on. I will retrieve the group of Mil-Spec sacks that I have (That all fit) and perhaps we can figure out a vendor code or something that differentiates them. Most likely on the next run we will rebate the trigger guard bump so the sacks fit across the stack better. Sorry about that all! |
|
Originally Posted By TZLVredmist: Glad to see these landing for folks. A note on the "Mil-Spec" nut sacks. @tommyidone Got his lower and all 10 of his Mil-Spec sacks don't fit and he has confirmed that it's indeed the edge of the sacks contacting the trigger guard portion before getting a chance to fully seat in the dovetail. All the rest are good (Plastics, Cloak import, Tribe Tactical Etc.) I swapped out a tribe for the one that didn't fit earlier in the thread so I have hands on. I will retrieve the group of Mil-Spec sacks that I have (That all fit) and perhaps we can figure out a vendor code or something that differentiates them. Most likely on the next run we will rebate the trigger guard bump so the sacks fit across the stack better. Sorry about that all! 
|
|
Originally Posted By November5: All part of the fun of dealing with mil-spec! Originally Posted By November5: Originally Posted By TZLVredmist: Glad to see these landing for folks. A note on the "Mil-Spec" nut sacks. @tommyidone Got his lower and all 10 of his Mil-Spec sacks don't fit and he has confirmed that it's indeed the edge of the sacks contacting the trigger guard portion before getting a chance to fully seat in the dovetail. All the rest are good (Plastics, Cloak import, Tribe Tactical Etc.) I swapped out a tribe for the one that didn't fit earlier in the thread so I have hands on. I will retrieve the group of Mil-Spec sacks that I have (That all fit) and perhaps we can figure out a vendor code or something that differentiates them. Most likely on the next run we will rebate the trigger guard bump so the sacks fit across the stack better. Sorry about that all! It's not truly "Mil Spec" unless it was delivered on a certified worm wood free pallet! IT"S ON THE CHART! 
|
INOCULUM - LIMA SIX dedicated Lower (Page 13 of 15)
Armory Sponsor