User Panel
User Panel
User Panel
|
Posted: 9/21/2023 4:16:30 AM EDT
[#1]
MRE 21166: one sitting on gunbroker at 750, so less than that. Sold from retailers around 500, and sold out, so more than that.
Med RAS: 6-700. And if you're keen to move a Med RAS, I might be in the market :) |
|
|
|
CA, USA
|
Posted: 9/21/2023 7:10:38 PM EDT
[#2]
Value of a NIB SR-25 APC upper?
Thanks |
|
|
USA
|
Posted: 9/25/2023 7:25:56 PM EDT
[#3]
5/8 Long Tine MAMS. Professionally installed and removed. Never fired. Anybody know what the range is on these things nowadays?
|
|
|
|
Posted: 10/1/2023 6:01:27 PM EDT
[#4]
What’s a 16 inch SR-15 mod 2 rifle with keymod rail worth? It has the original LMT sopmod stock and sights.
|
|
|
|
|
Posted: 10/1/2023 6:08:42 PM EDT
[#5]
Honestly, you’re probably better off splitting, as you will get more.
$1650-$1900 for the lower, depending on how long you want to sit. $1100-$1500 for upper depending on condition and included accessories (BUIS, etc.). Most people want just the lower right now as there are tons of uppers. |
|
|
|
|
Posted: 10/1/2023 6:21:07 PM EDT
[#6]
Quote HistoryOriginally Posted By Bkbz: Honestly, you’re probably better off splitting, as you will get more. $1650-$1900 for the lower, depending on how long you want to sit. $1100-$1500 for upper depending on condition and included accessories (BUIS, etc.). Most people want just the lower right now as there are tons of uppers. Thanks for the info. I may end up doing that. |
|
|
|
MP, USA
|
Posted: 10/4/2023 8:02:05 PM EDT
[Last Edit: JoshNC]
[#7]
Lightly used complete spare SR25 APC chrome lined barrel with gas system and recent production short tine MAMS. This is the barrel and gas system, not a rifle.
|
|
|
CA, USA
|
Posted: 10/4/2023 9:45:59 PM EDT
[#8]
Quote HistoryOriginally Posted By JoshNC: Lightly used complete spare SR25 APC chrome lined barrel with gas system and recent production short tine MAMS. This is the barrel and gas system, not a rifle. @bleaman225 may be able to give you a datapoint. |
|
|
GA, USA
|
Posted: 10/10/2023 1:22:18 PM EDT
[#9]
What’s a lightly used skyscraper valued at? I need another
|
|
|
|
Posted: 10/11/2023 4:20:51 AM EDT
[#10]
What can I expect to pay for a KAC URX 3.1 in 10.75"?
It's the last rail I'm looking for and probably the most expensive. 
|
|
|
|
|
Posted: 10/11/2023 4:21:58 AM EDT
[#11]
You could find someone nice to sell one to you for 3-400 or as much as 1200
|
|
|
|
|
Posted: 10/11/2023 5:30:36 PM EDT
[#12]
Quote HistoryOriginally Posted By Tactical_Bucket: You could find someone nice to sell one to you for 3-400 or as much as 1200 Wild. Thanks for the response. Looking for someone nice to sell me their rail then! 
|
|
|
|
|
Posted: 10/12/2023 9:55:15 AM EDT
[#13]
Near-new 2015 manufactured complete SR25 lower?
|
|
|
|
|
Posted: 10/12/2023 11:07:21 AM EDT
[#14]
Quote HistoryOriginally Posted By PAESAN: Near-new 2015 manufactured complete SR25 lower? 1500-1700 if anyone bites. |
|
|
|
|
Posted: 10/12/2023 11:55:04 AM EDT
[#15]
Quote HistoryOriginally Posted By xxflyingturtlexx: 1500-1700 if anyone bites. Quote HistoryOriginally Posted By xxflyingturtlexx: Originally Posted By PAESAN: Near-new 2015 manufactured complete SR25 lower? 1500-1700 if anyone bites. Thanks, that’s what I was thinking. |
|
|
|
|
Posted: 10/12/2023 3:49:34 PM EDT
[#16]
Quote HistoryOriginally Posted By PAESAN: Near-new 2015 manufactured complete SR25 lower? Does it have the right side bolt release? |
|
|
|
GA, USA
|
Posted: 10/17/2023 8:44:09 AM EDT
[#17]
Thinking about letting go of my factory 16" e3 mod 1 upper with 3.1 rail, ambi CH, no sights with stripped lower (wilson LPK, USGI trigger).
Is $2500 a fair asking price? I figure 1500 for the upper and 1000 for the lower? Putting $ towards 30cal build. |
|
|
|
Posted: 10/25/2023 12:25:40 PM EDT
[Last Edit: ScrubbyDoo]
[#18]
Decent price to pay for an unfired 11.5 Mod 2 barrel & gas system?
I don’t see just the barrels up for a sale very often. Thanks |
|
|
|
CA, USA
|
Posted: 10/25/2023 2:12:31 PM EDT
[#19]
Quote HistoryOriginally Posted By ScrubbyDoo: Decent price to pay for an unfired 11.5 Mod 2 barrel & gas system? I don’t see just the barrels up for a sale very often. Thanks Maybe around $400. Unfired stripped Mod2 CQB uppers (no BCG, CH, sights) typically bring $750-$850. |
|
|
TN, USA
|
Posted: 10/25/2023 4:00:46 PM EDT
[#20]
What's the going rate for a KAC 14.5" upper w/ dimpled barrel (PN 30355)? The prices I've seen recently have been all over the place. The upper has about 2,500 rounds through it as it is in very good condition. All parts that came with it from factory with the exception of a PRI gasbuster charging handle instead of the stock charging handle.
|
|
|
|
Posted: 10/25/2023 4:24:33 PM EDT
[#21]
Quote HistoryOriginally Posted By hjmpanzr: What's the going rate for a KAC 14.5" upper w/ dimpled barrel (PN 30355)? The prices I've seen recently have been all over the place. The upper has about 2,500 rounds through it as it is in very good condition. All parts that came with it from factory with the exception of a PRI gasbuster charging handle instead of the stock charging handle. I sold my NIB Mod 1 14.5" upper for just north of $5k back in June, but the market has softened a ton since then. My guess is yours might go around $3.0-3.5k if it's in otherwise good condition. |
|
|
|
TN, USA
|
Posted: 10/25/2023 5:06:28 PM EDT
[#22]
Quote HistoryOriginally Posted By mdavis: I sold my NIB Mod 1 14.5" upper for just north of $5k back in June, but the market has softened a ton since then. My guess is yours might go around $3.0-3.5k if it's in otherwise good condition. Thanks for the info. That’s helpful to get a good data point. |
|
|
|
Posted: 10/26/2023 9:07:42 PM EDT
[#23]
Value on a m110k1 gas block?
|
|
|
|
|
Posted: 10/26/2023 9:26:26 PM EDT
[#24]
Quote HistoryOriginally Posted By Rothperson87: Value on a m110k1 gas block? Guy on GB had 2 @ 1350 like a month ago. Gone now. |
|
|
|
|
Posted: 10/26/2023 9:41:43 PM EDT
[#25]
Quote HistoryOriginally Posted By RedFox1911: Guy on GB had 2 @ 1350 like a month ago. Gone now. Each? |
|
|
|
LA, USA
|
Posted: 10/27/2023 12:41:24 PM EDT
[#26]
Request value: SR-15 E3 - MLok. Used. 200 rds down the pipe. No box or papers. No sights. What would be a quick and easy sale ? Thank you.
|
|
|
TX, USA
|
Posted: 10/27/2023 2:17:13 PM EDT
[#27]
Price check on an ECC with long time MAMS, less than 100rds through it?
|
|
|
|
Posted: 10/27/2023 11:25:58 PM EDT
[Last Edit: RedFox1911]
[#28]
Quote HistoryOriginally Posted By Rothperson87: Each? Quote HistoryOriginally Posted By Rothperson87: Originally Posted By RedFox1911: Guy on GB had 2 @ 1350 like a month ago. Gone now. Each? Yes per unit |
|
|
|
|
Posted: 10/30/2023 7:01:12 PM EDT
[Last Edit: 556fmj]
[#29]
Price check on the following: KAC SR15e3 Mod 0 upper complete with E3 bolt group, charging handle, rear 600m sight. Used upper with maybe 200 to 300 rds through it. Too many uppers and looking to move this on the EE.
|
|
|
|
NC, USA
|
Posted: 11/9/2023 9:58:43 AM EDT
[#30]
I have a new Knights SR-15 Mod 1 (16") that has never been fired except from the factory. It has original case and everything as it came from the factory. It does have the QD lower.
Any idea on what this is worth? Thinking of selling it. |
|
|
CA, USA
|
Posted: 11/10/2023 1:25:15 AM EDT
[#31]
How much would a KAC SR25 ECR upper go for now?
|
|
|
|
Posted: 11/11/2023 7:15:00 AM EDT
[#32]
What is an all original great condition surplus m110 upper going for?
|
|
|
|
USA
|
Posted: 11/11/2023 8:52:40 PM EDT
[Last Edit: M-Aurelius]
[#33]
KAC Element Series Posters. Still in original tube.
Also; Long Tine MAMS .308, 5/8 Triple Tap, mounted on backup gun never used. Still have original packaging. This is one of the first batch to come out. Any help would be appreciated. |
|
|
|
Posted: 11/12/2023 3:13:53 PM EDT
[#34]
How about a Vero Beach SR-25 5 digit gun with fiberglass tube and a barrel around 28” long? Threaded but need to take the hider off it to see if it’s factory or not.
|
|
|
|
|
Posted: 11/12/2023 9:01:22 PM EDT
[#35]
Quote HistoryOriginally Posted By kells81: How about a Vero Beach SR-25 5 digit gun with fiberglass tube and a barrel around 28” long? Threaded but need to take the hider off it to see if it’s factory or not. I don't think any of those were threaded from the factory.  The barrel should be a 24in for a SR25 match rifle.One has been sitting on GB for just shy of 6k. I would say 4500-5500 is probably the clearing price. Does it come with anything else? |
|
|
|
|
Posted: 11/14/2023 5:16:11 PM EDT
[#36]
Quote HistoryOriginally Posted By RedFox1911: I don't think any of those were threaded from the factory. The barrel should be a 24in for a SR25 match rifle.One has been sitting on GB for just shy of 6k. I would say 4500-5500 is probably the clearing price. Does it come with anything else? @redfox1911 The barrel is 26" up to the threads which after pulling the flash hider are not factory. Going to send it to be chopped to 20" 
|
|
|
|
|
Posted: 11/14/2023 7:51:30 PM EDT
[#37]
Quote HistoryOriginally Posted By kells81: @redfox1911 The barrel is 26" up to the threads which after pulling the flash hider are not factory. Going to send it to be chopped to 20" https://www.ar15.com/media/mediaFiles/43495/IMG_0021-3025417.jpg Quote HistoryOriginally Posted By kells81: Originally Posted By RedFox1911: I don't think any of those were threaded from the factory. The barrel should be a 24in for a SR25 match rifle.One has been sitting on GB for just shy of 6k. I would say 4500-5500 is probably the clearing price. Does it come with anything else? @redfox1911 The barrel is 26" up to the threads which after pulling the flash hider are not factory. Going to send it to be chopped to 20" https://www.ar15.com/media/mediaFiles/43495/IMG_0021-3025417.jpg Can you get some more pics of the gas block? I have never seen mention of a 26in barrel on the Match rifles, all 24in. Either yours is incredibly rare or it is some kind of aftermarket barrel. I would figure that out before you cut it down IMO. |
|
|
|
MO, USA
|
Posted: 11/14/2023 11:39:57 PM EDT
[#38]
I expected to see threads in front of the gas block. I've never seen one like that.
|
|
|
|
Posted: 11/14/2023 11:41:23 PM EDT
[Last Edit: kells81]
[#39]
Quote HistoryOriginally Posted By RedFox1911: Can you get some more pics of the gas block? I have never seen mention of a 26in barrel on the Match rifles, all 24in. Either yours is incredibly rare or it is some kind of aftermarket barrel. I would figure that out before you cut it down IMO. Quote HistoryOriginally Posted By RedFox1911: Originally Posted By kells81: Originally Posted By RedFox1911: I don't think any of those were threaded from the factory. The barrel should be a 24in for a SR25 match rifle.One has been sitting on GB for just shy of 6k. I would say 4500-5500 is probably the clearing price. Does it come with anything else? @redfox1911 The barrel is 26" up to the threads which after pulling the flash hider are not factory. Going to send it to be chopped to 20" https://www.ar15.com/media/mediaFiles/43495/IMG_0021-3025417.jpg Can you get some more pics of the gas block? I have never seen mention of a 26in barrel on the Match rifles, all 24in. Either yours is incredibly rare or it is some kind of aftermarket barrel. I would figure that out before you cut it down IMO. It measures 26” or a hair under it based off cleaning rod measure. Gas block top/bottom. It appears to have been off maybe but my guess is for the thread job which kinda kills any extra points on the 26”.    Originally Posted By defender: I expected to see threads in front of the gas block. I've never seen one like that. Kicking around the broker and others it’s hit or miss on gas block with threads or not. Anything in the 24 range has the same block where most 20’s have the other block. |
|
|
|
|
Posted: 11/15/2023 6:41:23 PM EDT
[#40]
thinking of getting rid of a mod2 upper that i picked off the ee a while back.
factory 16" mlok upper that was shortened to 13.7" by d.wilson sandcutter from a couple years ago with a single ejector phos. bolt KAC non-ambi charging handle KAC 3-prong qdc KAC micro buis upper was painted field drab back when AERVO was still available, total round count was <500 when i got it and i only put a couple hundred round through it. it cycles perfectly and piles wolf gold at 3:00 with a springco blue and h2 buffer, accuracy isn't bad either. no real need to get rid of it other than to make space for other projects. what would a realistic asking price be guys? -T |
|
|
|
KY, USA
|
Posted: 11/15/2023 10:58:34 PM EDT
[#41]
Value of the Terminator Handstop part number 25460. Found one in my parts bin. Not sure if they are still in production.
|
|
|
CA, USA
|
Posted: 11/16/2023 11:42:16 AM EDT
[#42]
Quote HistoryOriginally Posted By mgpatty: Value of the Terminator Handstop part number 25460. Found one in my parts bin. Not sure if they are still in production. Pretty sure they are discontinued. The last “want to buy” ad that I saw was offering $150 for one. |
|
|
|
Posted: 11/16/2023 12:51:03 PM EDT
[#43]
Quote HistoryOriginally Posted By spdrcrgts: Pretty sure they are discontinued. The last “want to buy” ad that I saw was offering $150 for one. Quote HistoryOriginally Posted By spdrcrgts: Originally Posted By mgpatty: Value of the Terminator Handstop part number 25460. Found one in my parts bin. Not sure if they are still in production. Pretty sure they are discontinued. The last “want to buy” ad that I saw was offering $150 for one. I don't think these are discontinued. I've seen them pop up a couple times this year on Operation Parts. |
|
|
|
TX, USA
|
Posted: 11/18/2023 10:40:00 PM EDT
[#44]
What does a 10.75 URX 2 in the 556 variety go for? Ive got one on a old AAC 300 blackout upper....
|
|
|
|
Posted: 11/21/2023 7:42:22 AM EDT
[#45]
Quote HistoryOriginally Posted By FrankW134: Sr15e3 CQB upper, round count is approx. 3k (90% suppressed), with an additional 500 or so UTMs down the tube. Trying to price with and without everything on it; m600 scout, T1 in KAC mount, and FP PEQ15 (2018 mfg date, with full accessory kit.) Quote HistoryOriginally Posted By FrankW134: Originally Posted By spdrcrgts: Can’t really say with no details and only one picture. it appears to be a Gen3 “Costa” upper which is fairly rare, along with the equally rare 3T. The ryound count and obvious paint are going to play a factor in pricing. Sr15e3 CQB upper, round count is approx. 3k (90% suppressed), with an additional 500 or so UTMs down the tube. Trying to price with and without everything on it; m600 scout, T1 in KAC mount, and FP PEQ15 (2018 mfg date, with full accessory kit.) FYI, I listed it at a penny a couple days ago on GB with the T1 and 3t, I'm anxious to see what it sells for. |
|
|
|
MO, USA
|
Posted: 11/22/2023 12:09:03 PM EDT
[Last Edit: defender]
[#46]
NIB Mod 2 E3 mlok uppers in 11.5 and 14.5.
|
|
|
|
Posted: 11/22/2023 12:59:50 PM EDT
[#47]
Quote HistoryOriginally Posted By defender: NIB Mod 2 E3 mlok uppers in 11.5 and 14.5. Most dealers have the 3.2 in stock so I’d guess several hundred less with the E3 bolts. I sold an 11.5” E3 when the 3.2s were coming out for $1600, not sure if that helps. The scarcity sure has diminished quite a bit |
|
|
|
MO, USA
|
Posted: 11/22/2023 1:34:18 PM EDT
[#48]
Quote HistoryOriginally Posted By MrHelper: Most dealers have the 3.2 in stock so I’d guess several hundred less with the E3 bolts. I sold an 11.5” E3 when the 3.2s were coming out for $1600, not sure if that helps. The scarcity sure has diminished quite a bit Thanks |
|
|
|
Posted: 11/25/2023 4:37:15 PM EDT
[#49]
Going rate for these? FF carbine and mid.
 
|
|
|
|
|
Posted: 11/25/2023 5:14:22 PM EDT
[#50]
Anyone know what the original combat trigger guards are worth these days?
Anyone know the correct p/n?  Attached File |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
