Armory Sponsor
Posted: 5/2/2016 4:15:26 PM EDT
|
Who all uses one? I need one to finish my build and they have been OOS for awhile.
Also, if anyone does have one, can you give me some measurements on it? Particularly the thread length. I'm just trying to figure out how much of a spacer I will need. Building a 6" Ti can that will be used on my 8" 300 with Subsonics. It's basically a baffle stack with a blast chamber. |
|
Quoted:
I have one and it works great. I'd pull it off and measure for you, but the last time I tried it didn't want to unscrew  I ordered mine two months ago right before I heard he would be making a batch when therewereenough orders for them.... Still have not heard a peep. |
|
Who else makes the YHM adapter? My eFile F1 308 can was approved, wanted to get things started.
I emailed DM 6 weeks ago, said want to place my order and am aware of the long lead time. I also provided my phone # for them to call me for payment. waited for 4 weeks, emailed again. Never got an email reply or phone call/txt from them. |
|
Quoted:
Who else makes the YHM adapter? My eFile F1 308 can was approved, wanted to get things started. I emailed DM 6 weeks ago, said want to place my order and am aware of the long lead time. I also provided my phone # for them to call me for payment. waited for 4 weeks, emailed again. Never got an email reply or phone call/txt from them. You can't place orders with him, all stuff will be stocked on the website and then he will open up custom ordering again. He is still taking custom orders for the rimfire and pistol stuff he has non listed stock of. |
| I have a SiCo Omega 30cal in jail right now and my current cans are YHM Phantom LT's. I would really like to be able to use the YHM short QD system with my Omega, does anyone know which adapter I can use? I'm not sure what thread pitch and outer dimension to I need. Any help would be greatly appreciated. Thanks! |
|
Quoted:
I have a SiCo Omega 30cal in jail right now and my current cans are YHM Phantom LT's. I would really like to be able to use the YHM short QD system with my Omega, does anyone know which adapter I can use? I'm not sure what thread pitch and outer dimension to I need. Any help would be greatly appreciated. Thanks! You need the one specific to the Omega, not the various Form 1 versions. DM offers the longer version for the full size .30 muzzle devices and a shorter one for the 5.56 and LT muzzle devices. |
|
Quoted:
You need the one specific to the Omega, not the various Form 1 versions. DM offers the longer version for the full size .30 muzzle devices and a shorter one for the 5.56 and LT muzzle devices. Quoted:
Quoted:
I have a SiCo Omega 30cal in jail right now and my current cans are YHM Phantom LT's. I would really like to be able to use the YHM short QD system with my Omega, does anyone know which adapter I can use? I'm not sure what thread pitch and outer dimension to I need. Any help would be greatly appreciated. Thanks! You need the one specific to the Omega, not the various Form 1 versions. DM offers the longer version for the full size .30 muzzle devices and a shorter one for the 5.56 and LT muzzle devices. Thanks big waylon! Im still a little confused though, on the DM website there is a drop down menu for Thread Pitch and OD witht he following options listed: Non DM Ti D size 1.500 OD 20tpi Non DM SS D size 1.500 OD 20tpi DM 1.625 OD 24tpi DM 1.500 OD 24tpi I'm assuming that this is the thread spacing that attaches to the omega inner threads but I am unsure as to what the correct threading for the 30 cal omega is. DOes anyone have the specs? |
|
Quoted:
Thanks big waylon! Im still a little confused though, on the DM website there is a drop down menu for Thread Pitch and OD witht he following options listed: Non DM Ti D size 1.500 OD 20tpi Non DM SS D size 1.500 OD 20tpi DM 1.625 OD 24tpi DM 1.500 OD 24tpi I'm assuming that this is the thread spacing that attaches to the omega inner threads but I am unsure as to what the correct threading for the 30 cal omega is. DOes anyone have the specs? It's none of those. Those are for the SD/Apogee tubes and DM's custom tubes. He used to have the Omega version listed separately, but I don't see it on his site right now. Trust me on this, as I have the very first one he made and am the person that loaned him the pieces to duplicate. 
Might just have to email him and ask if he's still doing them. As soon as my local machinist has the time, he's going to make me a new one and I won't need this one anymore. (Nothing wrong with it, just going with a different design instead of the spanner notches) 
|
|
Big Waylon,
Thanks for clearing all of that up, you've been a big help. I actually ordered a flat end cap from your guy and should be getting it in the mail today. Let me know if you hear anything about the new YHM QD adapters or if you want to sell the short one you have now. Thanks again! |
Armory Sponsor