Armory Sponsor
Posted: 4/24/2016 3:34:51 PM EDT
|
What is the overall length that would need to be submitted on a Form 1 with the 922R kit installed with the folding stock? My kit is ordered and I would like to get the ball rolling on the Form 1.
Thank you in advance for your help with this! |
|
Source Product Name CZ Scorpion EVO 3 A1 Purpose Law Enforcement Chambering 9mm Luger Magazine Capacity 30+1 Magazine Type Double stack polymer Frame Fiber-reinforced polymer Grips Polymer, adjustable for reach to trigger Trigger Mech SA Sights Low-profile fully adjustable aperture and post Barrel Cold hammer forged, muzzle threaded 18x1 right-hand Barrel Length 7.72 in Weight 6.1 lbs Overall Length 26 in Height 9.4 in Safety Ambidextrous thumb safety |
|
Quoted:
Source Product Name CZ Scorpion EVO 3 A1 Purpose Law Enforcement Chambering 9mm Luger Magazine Capacity 30+1 Magazine Type Double stack polymer Frame Fiber-reinforced polymer Grips Polymer, adjustable for reach to trigger Trigger Mech SA Sights Low-profile fully adjustable aperture and post Barrel Cold hammer forged, muzzle threaded 18x1 right-hand Barrel Length 7.72 in Weight 6.1 lbs Overall Length 26 in Height 9.4 in Safety Ambidextrous thumb safety Thank you Sir! |
|
Quoted:
Are they shipping with the 1/2x28 thread pitch yet? I spoke with CZ USA direct as I am awaiting the 2016 models and it was stated that they project them to start rolling out to distributors late June early July but no guarantees to beat 41F unfortunately |
|
Quoted:
Are they shipping with the 1/2x28 thread pitch yet? I don't think so. I put in for allocation with three different wholesalers and talked with the salesman from RSR. I believe he said that they've had their order in since November and they don't know if they will come in this afternoon or 2 months from now. Another member gave me the heads up that it may be July before they are expected, which would suck because I would REALLY like to get my Form 1 submitted before 41f. |
|
The 1/2X28 would be great but there are adapters on the market and they're not all that expensive... or for a bit more you could just have it rethreaded.
For my project I'd really like the 3 lug for the cool factor but I think I'm just going to get a 5/8X24 adapter to go with a fairly common thread pitch that will fit both my pending Omega 9K and Hybrid. |
|
Quoted:
I spoke with CZ USA direct as I am awaiting the 2016 models and it was stated that they project them to start rolling out to distributors late June early July but no guarantees to beat 41F unfortunately Quoted:
Quoted:
Are they shipping with the 1/2x28 thread pitch yet? I spoke with CZ USA direct as I am awaiting the 2016 models and it was stated that they project them to start rolling out to distributors late June early July but no guarantees to beat 41F unfortunately Fuck. I have been waiting for a new 2016 one in FDE I pre ordered online and paid for fron kygunco back in early December last year. I call them once a month to check status. Last month they told me they were in the country but still in customs . Now I am wondering if they are full of shit. |
|
Quoted:
Fuck. I have been waiting for a new 2016 one in FDE I pre ordered online and paid for fron kygunco back in early December last year. I call them once a month to check status. Last month they told me they were in the country but still in customs . Now I am wondering if they are full of shit. Quoted:
Quoted:
Quoted:
Are they shipping with the 1/2x28 thread pitch yet? I spoke with CZ USA direct as I am awaiting the 2016 models and it was stated that they project them to start rolling out to distributors late June early July but no guarantees to beat 41F unfortunately Fuck. I have been waiting for a new 2016 one in FDE I pre ordered online and paid for fron kygunco back in early December last year. I call them once a month to check status. Last month they told me they were in the country but still in customs . Now I am wondering if they are full of shit. If it makes you feel any better the timeframe CZ gave me at Shot was June/July |
|
Quoted:
If it makes you feel any better the timeframe CZ gave me at Shot was June/July That's one of the reasons I just went with one that PSA was offering on sale a week or so ago (still on sale). If I need a 1/2x28 thread, Class 3 Machining will do it for $65.00. Since I already have a SilencerCo Octane, I might just go with their 18mm Scorpion adapter. I picked up a Side Project, Magpul Zhukov stock, (being kept at my buddies shop until the stamp comes in), and so the project starts! 
Thinking about picking up a SilencerCo Hybrid to be "mostly" dedicated to the CZ - but I'm still flipping coins on that. 
Have fun, Bob S. |
|
Quoted:
The 1/2X28 would be great but there are adapters on the market and they're not all that expensive... or for a bit more you could just have it rethreaded. For my project I'd really like the 3 lug for the cool factor but I think I'm just going to get a 5/8X24 adapter to go with a fairly common thread pitch that will fit both my pending Omega 9K and Hybrid. Fuck it. I may just go this route. |
Armory Sponsor