Armory Sponsor
Posted: 1/30/2012 10:00:27 AM EDT
| Does anyone have a pic with an 11" Samson Evolution on a 11.3 barrel. I am going to have an AAA 51t mount on it and wanted to see if it would work. If not, what is the actual length of the Evolution hand guard? Thanks! |
|
You're going to be close on the measurements and getting the 51T to mount. Typically you want the forearm 1" shorter than the barrel.
I think with what you're wanting the Evo rail will have to be large enough to accommodate the suppressor's OD. I have done some builds with a Troy 7.2 TRX and a 7.5" barrel with a YHM QD and it was tucked inside the TRX just a little bit. The suppressor was able to mount onto the QD with a nearly seamless look. I'd link to it but there's a few hurdles my blackberry doesn't like to perform  Posted Via AR15.Com Mobile |
|
Quoted:
You're going to be close on the measurements and getting the 51T to mount. Typically you want the forearm 1" shorter than the barrel. I think with what you're wanting the Evo rail will have to be large enough to accommodate the suppressor's OD. I have done some builds with a Troy 7.2 TRX and a 7.5" barrel with a YHM QD and it was tucked inside the TRX just a little bit. The suppressor was able to mount onto the QD with a nearly seamless look. I'd link to it but there's a few hurdles my blackberry doesn't like to perform
Posted Via AR15.Com Mobile This is what I figured, but was hoping someone had done this and could post some pics. Thanks for the reply! |
Armory Sponsor