Armory Sponsor
Posted: 8/3/2015 5:18:00 PM EDT
Anyone else have one? I bought one just for the tacti-cool factor, and its very well-built, and tiny. Thinking about SBRing it when the factory stocks are released next month (per IWI).
|
|
Quoted:
Anyone else have one? I bought one just for the tacti-cool factor, and its very well-built, and tiny. Thinking about SBRing it when the factory stocks are released next month (per IWI). Debating between this and the EVO for my PCC SBR. Does the factory stock attach in a factory manner, or does it require modifications to the pistol? |
I was going to wait for the model with the arm brace to come out but when I saw the serial number I had to have it. Mine is #911. I already sent in my Form1 to SBR it and picked up some 32 round mags from the IWI USA web store. Have only run about 500 rounds through it so far but with a mixture of ammo it has functioned 100%. Not much recoil and with the mini red dot it is pretty accurate. Accuracy will only increase with a shoulder stock. I thought the prices for the mags were pretty good at $17 for 20 rounders, $20 for 25 rounders, & $22 for 32 rounders. Certainly much better then SIG MPX mags and this is a much smaller platform. Even though the lower is polymer and I guess lighter then it's predecessor, because of the steel upper it feels very solid. Taking my barrel to a local smith to have it threaded so I can use my AAC TiRANT suppressor on it.
|
|
Quoted:
Debating between this and the EVO for my PCC SBR. Does the factory stock attach in a factory manner, or does it require modifications to the pistol? Quoted:
Quoted:
Anyone else have one? I bought one just for the tacti-cool factor, and its very well-built, and tiny. Thinking about SBRing it when the factory stocks are released next month (per IWI). Debating between this and the EVO for my PCC SBR. Does the factory stock attach in a factory manner, or does it require modifications to the pistol? The factory stock slips right on without any modification. See the plastic end (visible in my posted pictures) cap with the two holes running horizontally? You drive the two roll pins out, slip the cap off from bottom to top (rides in a dovetail channel), slide the factory stock on from top to bottom, & re-install the two roll pins. It's that easy. Just playing around it took me 2 minutes to take that end cap off so I imagine it would take another 2 minutes to install the stock. |
|
Quoted:
The factory stock slips right on without any modification. See the plastic end (visible in my posted pictures) cap with the two holes running horizontally? You drive the two roll pins out, slip the cap off from bottom to top (rides in a dovetail channel), slide the factory stock on from top to bottom, & re-install the two roll pins. It's that easy. Just playing around it took me 2 minutes to take that end cap off so I imagine it would take another 2 minutes to install the stock. Quoted:
Quoted:
Quoted:
Anyone else have one? I bought one just for the tacti-cool factor, and its very well-built, and tiny. Thinking about SBRing it when the factory stocks are released next month (per IWI). Debating between this and the EVO for my PCC SBR. Does the factory stock attach in a factory manner, or does it require modifications to the pistol? The factory stock slips right on without any modification. See the plastic end (visible in my posted pictures) cap with the two holes running horizontally? You drive the two roll pins out, slip the cap off from bottom to top (rides in a dovetail channel), slide the factory stock on from top to bottom, & re-install the two roll pins. It's that easy. Just playing around it took me 2 minutes to take that end cap off so I imagine it would take another 2 minutes to install the stock. Thanks for the info. |
|
Quoted: I'm in if they make one with a Glock mag compatible lower.
http://www.uzitalk.com/images/paraUzi.jpg http://masterpiecearms.com/shop/mpa930dmg-9mm-pistol-aluminum-lower/ 
|
|
Quoted:
Quoted: I'm in if they make one with a Glock mag compatible lower.
http://www.uzitalk.com/images/paraUzi.jpg http://masterpiecearms.com/shop/mpa930dmg-9mm-pistol-aluminum-lower/ http://17g3xk34ahga1v23q91j8y5oxka.wpengine.netdna-cdn.com/wp-content/uploads/2015/01/MPA930DMG-5a-300x300.jpg Own one. Love it. It's my tactical staple gun. Also sounds great suppressed. |
|
Quoted:
I was going to wait for the model with the arm brace to come out but when I saw the serial number I had to have it. Mine is #911. I already sent in my Form1 to SBR it and picked up some 32 round mags from the IWI USA web store. Have only run about 500 rounds through it so far but with a mixture of ammo it has functioned 100%. Not much recoil and with the mini red dot it is pretty accurate. Accuracy will only increase with a shoulder stock. I thought the prices for the mags were pretty good at $17 for 20 rounders, $20 for 25 rounders, & $22 for 32 rounders. Certainly much better then SIG MPX mags and this is a much smaller platform. Even though the lower is polymer and I guess lighter then it's predecessor, because of the steel upper it feels very solid. Taking my barrel to a local smith to have it threaded so I can use my AAC TiRANT suppressor on it. <a href="http://smg.photobucket.com/user/MadDogDan/media/DSC00481_zpsdj1mljth.jpg.html" target="_blank">http://img.photobucket.com/albums/v217/MadDogDan/DSC00481_zpsdj1mljth.jpg</a> <a href="http://smg.photobucket.com/user/MadDogDan/media/DSC00483_zps2e2o8fqr.jpg.html" target="_blank">http://img.photobucket.com/albums/v217/MadDogDan/DSC00483_zps2e2o8fqr.jpg</a> <a href="http://smg.photobucket.com/user/MadDogDan/media/DSC00485_zpspav8tv27.jpg.html" target="_blank">http://img.photobucket.com/albums/v217/MadDogDan/DSC00485_zpspav8tv27.jpg</a> Where are you buying your UZI PRO mags? |
|
Quoted:
Where are you buying your UZI PRO mags? Quoted:
Quoted:
I was going to wait for the model with the arm brace to come out but when I saw the serial number I had to have it. Mine is #911. I already sent in my Form1 to SBR it and picked up some 32 round mags from the IWI USA web store. Have only run about 500 rounds through it so far but with a mixture of ammo it has functioned 100%. Not much recoil and with the mini red dot it is pretty accurate. Accuracy will only increase with a shoulder stock. I thought the prices for the mags were pretty good at $17 for 20 rounders, $20 for 25 rounders, & $22 for 32 rounders. Certainly much better then SIG MPX mags and this is a much smaller platform. Even though the lower is polymer and I guess lighter then it's predecessor, because of the steel upper it feels very solid. Taking my barrel to a local smith to have it threaded so I can use my AAC TiRANT suppressor on it. <a href="http://smg.photobucket.com/user/MadDogDan/media/DSC00481_zpsdj1mljth.jpg.html" target="_blank">http://img.photobucket.com/albums/v217/MadDogDan/DSC00481_zpsdj1mljth.jpg</a> <a href="http://smg.photobucket.com/user/MadDogDan/media/DSC00483_zps2e2o8fqr.jpg.html" target="_blank">http://img.photobucket.com/albums/v217/MadDogDan/DSC00483_zps2e2o8fqr.jpg</a> <a href="http://smg.photobucket.com/user/MadDogDan/media/DSC00485_zpspav8tv27.jpg.html" target="_blank">http://img.photobucket.com/albums/v217/MadDogDan/DSC00485_zpspav8tv27.jpg</a> Where are you buying your UZI PRO mags? From their IWI web store. Check out their site @ www.iwi-us.com They are based in Harrisburg, PA. I purchased at 5:00pm one day and had them on my doorstep the next day with regular priority mail shipping (but I live in south eastern PA). |
| Giving my barrel to a local smith next week to have it threaded 1/2x28 so I can use my AAC TiRANT on it. Threading barrels for suppressors is his specialty. Then it's off to another local for some NFA engraving (sent in my Form1 already). When I get my tax stamp and folding stock I will give the upper and stock to another local to be ceracoated in MagPul FDE (I think the combo of black and FDE will look pretty sweet). I just discovered all these custom shops within ten minutes driving distance that can do all the work for me (I can screw thing up pretty quickly left to my own devices). |
Armory Sponsor