Armory Sponsor
Posted: 6/17/2013 9:16:54 AM EDT
|
I would also like to fit my AR also, in the same case once I get ahold of a Tavor.
Anyone have any experience with a Tavor fitting in a Drago 36" Double Gun Case? I'm going to be running an Aimpoint PRO on it. http://www.dragogear.com/products/tactical-rifle-cases/36-double-gun-case.html |
|
I have one of these Condor rifle cases that I had bought for an AR pistol, and luckily the Tavor JUST fits. Its a bit tight, and if you had a longer flash hider it may not zip. But its well made and pretty small (I believe I have the 28" version).
The Eotech EXPS just came in today, so I'm going to try and take a pic of all of it together in the case. Looks similar to this: 
|
|
Quoted:
Sweet! I would think a Aimpoint PRO would st at the same height as a EXPS which I just got in from DSG for my LE6920. I look forward to the pictures be sure to post them! Thanks a lot! I may end up getting this case instead. Ask and you shall receive. 
Just snapped the EXPS on, and I can confirm that it does straight co-witness with the flip-up irons on the Tavor. It also just barely fits in the Condor case I posted above. Its a small tad bit tight zipping across between the Eotech and the handguard grip, but its totally doable. And the inside edge pieces of the case have a pretty dense foam padding, so I'm good with it. I'd say I'm a bit particular about my cases, and I don't feel the need to replace this one for the Tavor for now. Planning on adding a Specwar, so we'll see when I change the flash hider. Can't beat $49 on Amazon, and they always have them at the local gunshows here: http://www.amazon.com/Condor-Rifle-Case-Black-3-Inch/dp/B006GHV5FA/ref=sr_1_1?ie=UTF8&qid=1371512882&sr=8-1&keywords=condor+rifle+case+28 |
|
Quoted:
Quoted:
Sweet! I would think a Aimpoint PRO would st at the same height as a EXPS which I just got in from DSG for my LE6920. I look forward to the pictures be sure to post them! Thanks a lot! I may end up getting this case instead. Ask and you shall receive.
Just snapped the EXPS on, and I can confirm that it does straight co-witness with the flip-up irons on the Tavor. It also just barely fits in the Condor case I posted above. Its a small tad bit tight zipping across between the Eotech and the handguard grip, but its totally doable. And the inside edge pieces of the case have a pretty dense foam padding, so I'm good with it. I'd say I'm a bit particular about my cases, and I don't feel the need to replace this one for the Tavor for now. Planning on adding a Specwar, so we'll see when I change the flash hider. Can't beat $49 on Amazon, and they always have them at the local gunshows here: http://www.amazon.com/Condor-Rifle-Case-Black-3-Inch/dp/B006GHV5FA/ref=sr_1_1?ie=UTF8&qid=1371512882&sr=8-1&keywords=condor+rifle+case+28 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1550&g2_serialNumber=1 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1553&g2_serialNumber=1 Sweet thanks for the pictures |
|
Quoted:
Quoted:
Sweet! I would think a Aimpoint PRO would st at the same height as a EXPS which I just got in from DSG for my LE6920. I look forward to the pictures be sure to post them! Thanks a lot! I may end up getting this case instead. Ask and you shall receive.
Just snapped the EXPS on, and I can confirm that it does straight co-witness with the flip-up irons on the Tavor. It also just barely fits in the Condor case I posted above. Its a small tad bit tight zipping across between the Eotech and the handguard grip, but its totally doable. And the inside edge pieces of the case have a pretty dense foam padding, so I'm good with it. I'd say I'm a bit particular about my cases, and I don't feel the need to replace this one for the Tavor for now. Planning on adding a Specwar, so we'll see when I change the flash hider. Can't beat $49 on Amazon, and they always have them at the local gunshows here: http://www.amazon.com/Condor-Rifle-Case-Black-3-Inch/dp/B006GHV5FA/ref=sr_1_1?ie=UTF8&qid=1371512882&sr=8-1&keywords=condor+rifle+case+28 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1550&g2_serialNumber=1 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1553&g2_serialNumber=1 How tall is that XPS? i have a Mepro M21 I don't want to have to take off. |
|
Quoted:
Quoted:
Quoted:
Sweet! I would think a Aimpoint PRO would st at the same height as a EXPS which I just got in from DSG for my LE6920. I look forward to the pictures be sure to post them! Thanks a lot! I may end up getting this case instead. Ask and you shall receive.
Just snapped the EXPS on, and I can confirm that it does straight co-witness with the flip-up irons on the Tavor. It also just barely fits in the Condor case I posted above. Its a small tad bit tight zipping across between the Eotech and the handguard grip, but its totally doable. And the inside edge pieces of the case have a pretty dense foam padding, so I'm good with it. I'd say I'm a bit particular about my cases, and I don't feel the need to replace this one for the Tavor for now. Planning on adding a Specwar, so we'll see when I change the flash hider. Can't beat $49 on Amazon, and they always have them at the local gunshows here: http://www.amazon.com/Condor-Rifle-Case-Black-3-Inch/dp/B006GHV5FA/ref=sr_1_1?ie=UTF8&qid=1371512882&sr=8-1&keywords=condor+rifle+case+28 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1550&g2_serialNumber=1 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1553&g2_serialNumber=1 How tall is that XPS? i have a Mepro M21 I don't want to have to take off. Again, this is the EXPS. EXPS is taller, so it works right with the Tavor. The regular XPS is without the quick release, so its shorter and too low for the Tavor. (I know you probably already know that, but just want to make sure so somebody lurking this thread doesn't get mislead) From Eotech website: Length/Width/Height: 3.5"x2.4"x2.8" (91.4X 60.9x71mm) |
|
Quoted:
Quoted:
Quoted:
Quoted:
Sweet! I would think a Aimpoint PRO would st at the same height as a EXPS which I just got in from DSG for my LE6920. I look forward to the pictures be sure to post them! Thanks a lot! I may end up getting this case instead. Ask and you shall receive.
Just snapped the EXPS on, and I can confirm that it does straight co-witness with the flip-up irons on the Tavor. It also just barely fits in the Condor case I posted above. Its a small tad bit tight zipping across between the Eotech and the handguard grip, but its totally doable. And the inside edge pieces of the case have a pretty dense foam padding, so I'm good with it. I'd say I'm a bit particular about my cases, and I don't feel the need to replace this one for the Tavor for now. Planning on adding a Specwar, so we'll see when I change the flash hider. Can't beat $49 on Amazon, and they always have them at the local gunshows here: http://www.amazon.com/Condor-Rifle-Case-Black-3-Inch/dp/B006GHV5FA/ref=sr_1_1?ie=UTF8&qid=1371512882&sr=8-1&keywords=condor+rifle+case+28 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1550&g2_serialNumber=1 http://sarasotariders.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=1553&g2_serialNumber=1 How tall is that XPS? i have a Mepro M21 I don't want to have to take off. Again, this is the EXPS. EXPS is taller, so it works right with the Tavor. The regular XPS is without the quick release, so its shorter and too low for the Tavor. (I know you probably already know that, but just want to make sure so somebody lurking this thread doesn't get mislead) From Eotech website: Length/Width/Height: 3.5"x2.4"x2.8" (91.4X 60.9x71mm) Thanks for the additional info. |
Armory Sponsor