Armory Sponsor
Posted: 10/21/2012 11:29:15 AM EDT
|
Guys, I have a Gen II MSAR STG. It has the round retainer for the reciever and Fwd Assist. I bought a used gen III stock with a square retainer.
I believe I have to get the reciever machined to fit correct? It can be used in an E4 with no issues correct? Thanks for the help guys. max |
|
Quoted:
In a pinch you can install a round receiver lock in a square lock stock and it will work. I thought you did that in the past. I was looking for that post but could not find it and didn't remember if it worked out correctly so I didn't post that info. BTW how tight did it hold the receiver into the stock? The reason I am asking is that my stock is getting loose. I can pull back on the FG and pull the receiver into the stock about 1/8". I stuck the receiver in Jenns stock and my spare Gen1 stock and it is tight. I am thinking the cross bar is gettign some wear on it causing it to get loose. All of ours are the Gen1 and Gen2 stocks. |
Armory Sponsor