Armory Sponsor
Posted: 7/20/2009 9:29:20 AM EDT
|
Not really a challenge, but I'd like every STG owner to:
1) Chamber a round 2) eject the round without firing 3) look at the case to see if it is deformed. 4) reply back with results so far, for me anyhow 55gr PMC Bronze brass case: bullets slightly bent. slight crush in case wall |
|
Quoted:
Not really a challenge, but I'd like every STG owner to: 1) Chamber a round 2) eject the round without firing 3) look at the case to see if it is deformed. 4) reply back with results so far, for me anyhow 55gr PMC Bronze brass case: bullets slightly bent. slight crush in case wall If you are having any issues with your rifle please let me take a look at it. I have them figured out and I promise I can fix any problem your rifle may have. I will have it for a few hours, then it will go on the brown truck. I want you to be 100% confident in your rifle. Dave Robertson 814-363-9264 ext 19 MSAR |
| Gen IV. 20 rnd factory mag, mil surplus ammo. All 20 no issues. Are you using MSAR mags or Aug mags? I started out with new Austrian mags and got the same issues as you did. Sold em on and got all MSAR's and have not looked back. I traced the problem to weak springs in te AUG mag. |
Armory Sponsor