Armory Sponsor
Posted: 7/27/2017 5:12:32 PM EDT
| Those of you with Super 1050s, where does your handle stop if you just let go? Mine naturally centers due to the primer slide and probably also the powder drop return rod spring at a position which is not at the top of the rams stroke. Press operates okay, but because of this, I have to push a little bit forward to fully index the shellplate. Is this normal or do I need to get the primer system adjusted better? I have fiddled with it a little bit but couldnt get it to center at the top of the ram stroke. Feels much like a xl650 with just a tiny bit of spring tension at the top of the stroke. |
|
Quoted:
Those of you with Super 1050s, where does your handle stop if you just let go? Mine naturally centers due to the primer slide and probably also the powder drop return rod spring at a position which is not at the top of the rams stroke. Press operates okay, but because of this, I have to push a little bit forward to fully index the shellplate. Is this normal or do I need to get the primer system adjusted better? I have fiddled with it a little bit but couldnt get it to center at the top of the ram stroke. Feels much like a xl650 with just a tiny bit of spring tension at the top of the stroke. Much easier to read if you double space after complete sentences. It's the site formatting. |
|
Quoted:
The Level 10 spring takes it to a whole new Level.  But seriously, I love the Level 10 spring, got 2 in reserve, one of the best "cheap" upgrades there are.L10 spring is that good? It about the only 1050 item from L10 I haven't got, other then the primer backer. |
|
Quoted:
CD, L10 spring is that good? It about the only 1050 item from L10 I haven't got, other then the primer backer. |
Armory Sponsor