Armory Sponsor
Posted: 4/30/2015 11:26:18 PM EDT
|
Anybody know if they make a part that will let you thread a 8-32 brush into it and the other end be a standard 1/4" hex shaft.
I want to put a primer pocket reamer that is 8-32 into a drill that doesn't have an adjustable chuck but a quick disconnect that accepts the standard 1/4 hex shaft. Thanks for any suggestions, JBL |
 Something like this. You can buy them for $4 from Midway or go to a hardware store and buy a coupling nut. |
|
Quoted:
<a href="http://s250.photobucket.com/user/dryflash3/media/Tools/P5310450.jpg.html" target="_blank">http://i250.photobucket.com/albums/gg272/dryflash3/Tools/P5310450.jpg</a> Something like this. You can buy them for $4 from Midway or go to a hardware store and buy a coupling nut. http://www.lowes.com/pd_423500-37672-884660_1z0v0z9+2z8vi__?productId=4582541&Ntt=8%2F32+coupling+nuts&pl=1¤tURL=%3FNtt%3D8%252F32%2Bcoupling%2Bnuts%26page%3D1&facetInfo=$1%20-%20$5 That is what I like about this site, always someone with information I can use even if I didn't ask the question. Thanks. |
|
I ordered some standoffs for electrical stuff. Found them at McMaster.
http://www.mcmaster.com/#female-threaded-hex-standoffs/=wzrutv |
|
Quoted: I ordered some standoffs for electrical stuff. Found them at McMaster. http://www.mcmaster.com/#female-threaded-hex-standoffs/=wzrutv Yes, a standard hardware item available at many places. |
Armory Sponsor