Armory Sponsor
Posted: 3/27/2013 1:25:10 PM EDT
|
I searched for "TAC 55 gr load".but it did not return any results, so please just a bit of help.
I have an 18" 1 in 8 barrel and am looking for 3000 fps with a 55 grain FMJ bullet. Any ideas? Starting point? Pet loads? Thanks in advance Jay |
|
http://www.ramshot.com/wp-content/uploads/2010/09/ramshot_handgun_rifle.pdf Page 9 has a 55 gr at 3002 ft |
|
Quoted:
http://www.ramshot.com/wp-content/uploads/2010/09/ramshot_handgun_rifle.pdf Page 9 has a 55 gr at 3002 ft Thanks, that is what I was looking for. I could not get their PDF. page to open Jay |
|
Quoted: You good to go now?Quoted: http://www.ramshot.com/wp-content/uploads/2010/09/ramshot_handgun_rifle.pdf Page 9 has a 55 gr at 3002 ft Thanks, that is what I was looking for. I could not get their PDF. page to open Jay |
|
Quoted:
Quoted:
You good to go now?
Quoted:
http://www.ramshot.com/wp-content/uploads/2010/09/ramshot_handgun_rifle.pdf Page 9 has a 55 gr at 3002 ft Thanks, that is what I was looking for. I could not get their PDF. page to open Jay I am , being I am out of Exterminator powder, I need to use my my TAC while I wait to resupply the Exterminator |
|
24.5 grains of TAC with a 55 grain hornady FMJ does just over 2800 fps out of my 16" barrel AR15. It would probably get you a bit closer with an 18" barrel, but I don't think you'll hit 3000. You can probably safely load a bit higher, make sure you work up loads properly and start low.
|
|
I searched for "TAC 55 gr load".but it did not return any results, so please just a bit of help.
I have an 18" 1 in 8 barrel and am looking for 3000 fps with a 55 grain FMJ bullet. Any ideas? Starting point? Pet loads? Thanks in advance Jay[/quote] Go down to AR15 loads I worked my way up amd back down to 25.5 with no issue http://accurateshooter.net/Downloads/sierra223ar.pdf |
|
Quoted:
24.5 grains of TAC with a 55 grain hornady FMJ does just over 2800 fps out of my 16" barrel AR15. It would probably get you a bit closer with an 18" barrel, but I don't think you'll hit 3000. You can probably safely load a bit higher, make sure you work up loads properly and start low. This load shoots 3/4" groups out of my 1:9 twist ACR. 
-ZA |
Armory Sponsor