[ARCHIVED THREAD] - COL question

Posted: 1/17/2013 7:40:37 PM EDT

OK, so this is a 300 BLK question, so Mods please move if needed

I'm reloading 110 Hornady V-Max's on a Hornady LNL press with Redding Competition dies. The Hodgdon's reloading guide calls for a COL of 2.040" with the 110 V-Max bullet. With the die as low as it can go and with the seating adjustment bottomed out the shortest COL I can achieve is 2.0645". I can't get the die to seat any deeper than this.

What can I do? Anybody else have had this issue?

Thanks in advance for the help!

Posted: 1/17/2013 7:44:45 PM EDT

[#1]

check out dryflash3's post in this thread, 3rd from the top
http://www.ar15.com/forums/t_6_42/385765_300_Blackout_Master_Thread.html

Posted: 1/17/2013 7:57:20 PM EDT

[#2]

Thanks for that - dryflash3 is showing a OAL of 2.01 for a 110g bullet - my issue is that the combo of my die and press can't go below 2.0645.

Has anybody had an issue like this?

Posted: 1/17/2013 8:12:33 PM EDT

[#3]

Call Redding 1-607-753-3331

Posted: 1/17/2013 8:22:28 PM EDT

[#4]

Dryflash - I got it!

On top of the die there is a hole that you can fit an allen wrench into for more seating depth adjustment. A few twists of the allen wrench and it's GTG.

Posted: 1/18/2013 6:59:32 PM EDT

[#5]

Quoted:

Dryflash - I got it!

On top of the die there is a hole that you can fit an allen wrench into for more seating depth adjustment. A few twists of the allen wrench and it's GTG.

[ARCHIVED THREAD] - COL question

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - COL question

[ARCHIVED THREAD] - COL question