Armory Sponsor
Posted: 1/29/2011 1:53:56 PM EDT
|
I tried this one out today but the results wern't too good.
Winchester 9mm brass, 4gr Titegroup, 115gr Hornady FMJ, 1.14" OAL. I only loaded 5 this way before realizing the primer was needed to keep the powder in the case.  That's what you get when you are used to priming rifle cases off the press and switch to pistol.
|
|
Quoted:
I tried this one out today but the results wern't too good. Winchester 9mm brass, 4gr Titegroup, 115gr Hornady FMJ, 1.14" OAL. I only loaded 5 this way before realizing the primer was needed to keep the powder in the case. That's what you get when you are used to priming rifle cases off the press and switch to pistol.You get a lot of FTFire that way, too. 
|
|
Quoted:
I tried this one out today but the results wern't too good. Winchester 9mm brass, 4gr Titegroup, 115gr Hornady FMJ, 1.14" OAL. I only loaded 5 this way before realizing the primer was needed to keep the powder in the case. That's what you get when you are used to priming rifle cases off the press and switch to pistol.BTDT, your not alone. |
Armory Sponsor