Armory Sponsor
Posted: 8/20/2010 2:34:21 AM EDT
|
Clicking on the Tutorials link above takes you to www.ar15.com  ETA: same thing happening for "Reloading Tools and Equipment" link |
|
Takes me to this:
For The Beginning Hand Loader: FAQ's for Beginners - By FB41
Reloading Tutorials by Manufacturers and the NRMA: http://www.ar15.com/content/page.html?id=397 A Reloading Tutorial With a Few Twists at www.rifle-company.com: http://rifle-company.com/phpbb/viewtopic.php?t=911&sid=45452cb220ac8809995ea48c7bbdb8ae On Line Videos for Beginning Reloaders: http://www.ar15.com/content/page.html?id=476 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––- Reloading .223 Rem - Tutorial Part 1 - Sorting and Tumbling: http://www.ar15.com/content/page.html?id=450 Reloading .223 Remington - Tutorial Part 2 - Lubing and Sizing: http://www.ar15.com/content/page.html?id=451 Reloading .223 Remington - Tutorial Part 3 - Primer Pocket Prep and Trimming: http://www.ar15.com/content/page.html?id=452 Reloading .223 Remington - Tutorial Part 4 - Priming, Dropping Powder, & Seating Bullets: http://www.ar15.com/content/page.html?id=469 ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––- Removing a Stuck Case From a Sizing Die : http://www.ar15.com/content/page.html?id=463 So, You Want to Load Wolf Steel Cases : http://www.ar15.com/content/page.html?id=423 Pulling Bullets with a Kinetic Bullet Puller : http://www.ar15.com/content/page.html?id=431 Loading 7.62X39 Ammunition: http://www.ar15.com/content/page.html?id=446 Decrimping Primer Pockets In .223 Remington Brass: http://www.ar15.com/content/page.html?id=447 Don't Crowd Cartridge Case Trim Length: http://www.ar15.com/content/page.html?id=477 How to Adjust a Possum Hollow Kwick Case Trimmer: http://www.ar15.com/content/page.html?id=594 Reloading with the LEE Classic Loader: http://www.ar15.com/content/page.html?id=595 –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– How to Compute Bullet RPM RPM=Revolutions/minute = [Bullet Speed (ft/sec) X 12 (in/ft) X 60 (sec/min)] / [Rifling Twist (Revolution/inch] = [Bullet Speed]X[720] / [Rifling Twist] Rev/min Example: Bullet Speed = 2700 ft/sec, Rifling Twist = 1 turn in 7 inches Bullet RPM = 2700(720)/7 = 277 714 revs per minute !! –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– How to Make .224 Diameter Bullets From .22 LR Brass: (Photos were removed from the remote server.) |
|
They're still working okay for me.
There's a link to the old backup thread I made the last time the tutorials got hosed. Look in my post in the Gateway thread, I think it's the last entry. I did a spot check while ago and I think all those links are still good. http://www.ar15.com/forums/topic.html?b=6&f=42&t=276745 The links in the equipment resource are still hosed and I haven't started working on them. Every single link disappeared but two, so they have to be reconstructed one file at a time. Fun. |
|
I am having the same issue.
Clicking on the "Tutorials" link (http://www.ar15.com/content/page.html?id=399) or the "Reloading Tools & Equpt" link (http://www.ar15.com/content/page.html?id=400) both take me to the ar15.com home page. I have the same problem in both MS IE and Google Chrome. "FAQs" and "Reloading References" both work fine. |
|
This is one of the reasons I made the tacked "Gateway" thread. The Content server and Resources are a good idea, but the execution is not so great. The last server move fucked things up immensely and frankly ticked me off due to the amount of work needed to rebuild the links.
|
|
Quoted:
This is one of the reasons I made the tacked "Gateway" thread. The Content server and Resources are a good idea, but the execution is not so great. The last server move fucked things up immensely and frankly ticked me off due to the amount of work needed to rebuild the links. Go to the Resources area and make sure you have the "Public" thing marked. I'd bet that's the "problem" (not really a problem, just a setting). 
|
|
Quoted:
Quoted:
This is one of the reasons I made the tacked "Gateway" thread. The Content server and Resources are a good idea, but the execution is not so great. The last server move fucked things up immensely and frankly ticked me off due to the amount of work needed to rebuild the links. Go to the Resources area and make sure you have the "Public" thing marked. I'd bet that's the "problem" (not really a problem, just a setting). It was okay on the one I checked this morning. I'll take another look. Someone try it now. The damn setting was changed, and I'll bet I'll did it when I intended to take the Equipment resource down (it truly is screwed up). I blame it on the cat. |
|
Quoted:
Quoted:
Quoted:
This is one of the reasons I made the tacked "Gateway" thread. The Content server and Resources are a good idea, but the execution is not so great. The last server move fucked things up immensely and frankly ticked me off due to the amount of work needed to rebuild the links. Go to the Resources area and make sure you have the "Public" thing marked. I'd bet that's the "problem" (not really a problem, just a setting). It was okay on the one I checked this morning. I'll take another look. Someone try it now. The damn setting was changed, and I'll bet I'll did it when I intended to take the Equipment resource down (it truly is screwed up). I blame it on the cat. It works great now! |
Armory Sponsor