Armory Sponsor
Posted: 2/16/2010 11:05:48 PM EDT
|
I was wondering can you use Lee handles with a lyman bullet mould?
oh before I forget, the lyman mould is a 2 bullet mould for 40 cal 172 bullet. |
|
I use Lee handles with both RCBS and Lyman moulds.
The RCBS required removing about 0.5mm from the thickness of the tongs. Took about 15 minutes with the Dremel. The Lyman required taking about 0.2mm from the side of the tongs. Took about 5 minutes with the Dremel. |
Armory Sponsor