Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
3/18/2009 6:54:28 AM EDT
Anyone ever use this? local shop has a fair amount...out of h335, blc, varget, tac....etc. Wonder how it will meter through a Lee auto disk?

3/18/2009 7:08:56 AM EDT
[#1]
One of my favorite powders for 55 grain and under projectiles in .223. It's a short cut extruded similar in texture/size to RL15 or Varget. It meters well, but not as well as 335 or BLC2.
3/18/2009 8:23:34 AM EDT
[#2]
If you find a gunpowder on the shelf in the appropriate burn speed for the bullets and cartridge you want to shoot, buy it.  There are no bad or awful canister grade gunpowders on the market, they're just different.

Even REX; it's cheap and dirty at low to moderate temps, and it always works.

The good thing about this hoarding is that it forces us to try different primers, powders, bullets, and cases than we've settled on as our "standards".  Some of us are going to get an eye opening experience and discover we needed to expand our selections sooner.


3/18/2009 9:16:45 AM EDT
[#3]
awesome! thanx!

Im a newb reloader and have what I think are good loads with the other powders. Just didnt want to buy just for the sake of buying, end up wasting primers and projectiles
3/19/2009 6:08:21 AM EDT
[#4]
This is a great powder for light-fast rounds.  I like it a lot for the 204 and 32gr VMax.  Pushed over 4000ft/sec easily.
Armory Sponsor