Armory Sponsor
Posted: 9/6/2008 4:05:04 PM EDT
|
Wasn't paying very good attention and now I have a 223 case stuck up inside a Dillon size/trim die. I was adjusting the trimmer to get the right amount of trim and you guessed it, got a case stuck. Sprayed some lube down then hole and that hasn't helped yet. How about some penetrating oil? Bad for the die? Another another suggestions? Maybe a 5 ton portr power? What a bust! Pay attention times 3 next time. Joe |
|
buy a stuck case removal tool Midway USA or I have a Drill and tap kit from Greenlee that I use. you basically tap the end of the case and use a screw to pull the stuck case out. good luck. |
| Sometimes you can put the die between two peices of wood in your vise and grab the end of the case with a pliers of vice grip and twist it out. Then cut the case in half and remove the decapping pin lock. I had one stick last year and I destroyed the decapping stem trying to remove the case. I called Redding and told them I wrecked it due to stupidity, they sent me a new one free of charge anyway. |
Armory Sponsor