Armory Sponsor
Posted: 10/2/2009 6:42:58 AM EDT
| I have a Navy lower, how do I remove the assembly from the stock lower housing? I cannot figure out how to take it apart. |
| I think u mean to say how do i get the actual trigger components out of the lower receiver housing.....if so, then simply unscrew the bottom 2 screws holding the cover on the bottom of the pistol grip, find the right hex and unscrew the hex screw just like you would be replacing a grip on an AR lower. Once you remove the screw its free to be removed, just remember to go slow cause a cpl. screws will pop out if not careful. |
|
Quoted: I think u mean to say how do i get the actual trigger components out of the lower receiver housing.....if so, then simply unscrew the bottom 2 screws holding the cover on the bottom of the pistol grip, find the right hex and unscrew the hex screw just like you would be replacing a grip on an AR lower. Once you remove the screw its free to be removed, just remember to go slow cause a cpl. screws will pop out if not careful. You also have to remove the screw under the left side safety switch and knock out the selector |
|
GSG Break down sticky
Go here it is the sticky at the top of this forum on how to break down the gsg and mods. |
| Check out the GSG-5 Teardown vid and the ICS lower installation vid HERE |
Armory Sponsor