Armory Sponsor
Posted: 3/20/2009 7:50:15 PM EDT
| Did the pin swap on my PK, plug and play, two minutes, and didn't need the long pin. Also put together my first AR lower from parts (building a 6.8), dead simple with directions from the ar forum,. I recommend it for those who haven't done it, takes about an hour |
|
Quoted:
Did the pin swap on my PK, plug and play, two minutes, and didn't need the long pin. Also put together my first AR lower from parts (building a 6.8), dead simple with directions from the ar forum,. I recommend it for those who haven't done it, takes about an hour I knew you'd have no pin troubles. For those who need to fit the long pin - just go slow and don't over do it. It needs to be snug! I've wondered about assembling my own lower - glad to hear it's not too tough. |
|
Quoted:
Quoted:
Did the pin swap on my PK, plug and play, two minutes, and didn't need the long pin. Also put together my first AR lower from parts (building a 6.8), dead simple with directions from the ar forum,. I recommend it for those who haven't done it, takes about an hour I knew you'd have no pin troubles. For those who need to fit the long pin - just go slow and don't over do it. It needs to be snug! I've wondered about assembling my own lower - glad to hear it's not too tough. Eventually I will be picking up an ICS folder (PK PDW-style). I know I need two "short pins" for the lower, but how about that particular stock? Will I need to enlarge the hole? An experience with these? |
|
Quoted:
Quoted:
Quoted:
Did the pin swap on my PK, plug and play, two minutes, and didn't need the long pin. Also put together my first AR lower from parts (building a 6.8), dead simple with directions from the ar forum,. I recommend it for those who haven't done it, takes about an hour I knew you'd have no pin troubles. For those who need to fit the long pin - just go slow and don't over do it. It needs to be snug! I've wondered about assembling my own lower - glad to hear it's not too tough. Eventually I will be picking up an ICS folder (PK PDW-style). I know I need two "short pins" for the lower, but how about that particular stock? Will I need to enlarge the hole? An experience with these? No idea -sorry, but you've got pins on hand to compare. I can put together whichever variation you need. Thanks, George |
Armory Sponsor