Armory Sponsor

Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer

Introducing TNVC's NEW and Exclusive Filmed SuperGain (FSG) and Chimera Panoramic Goggle Giveaway!

[ARCHIVED THREAD] - Navy lower

Posted: 12/10/2008 4:25:53 PM EDT

Just wanted to check with you guys before I order, the ICS navy lower will fit right?

http://www.blazingtoys.com/ics_partsmp5.html

Posted: 12/10/2008 4:30:24 PM EDT

[#1]

navy lower here

Posted: 12/10/2008 4:45:36 PM EDT

[#2]

I've heard the ICS wont but the CA will?

And don't even try an H&K lower!

Posted: 12/10/2008 4:47:29 PM EDT

[#3]

Link is dead

Posted: 12/10/2008 4:51:29 PM EDT

[#4]

Quoted:
I've heard the ICS wont but the CA will?

And don't even try an H&K lower!

I now nothing about ICS-CA etc etc. Never heard of any of them before I bought my GSG 2 week ago so you will have to be a little more specific I always thought of air soft as toys for 13-14 year olds

Posted: 12/10/2008 8:07:11 PM EDT

[#5]

http://www.airsoftpost.com/navy-lower-receiver-body-icsmarui-automatic-electric-p-26120.html

Posted: 12/22/2008 6:23:45 PM EDT

[#6]

Will the SEF lower fit?

Posted: 12/22/2008 7:22:24 PM EDT

[#7]

Yes it fits nice; no doubt they are from the same maker. It took about and hour to cut out the section for the serial number, drill it out for the push pins, selector hole and re-fit the pistol grip floor plate.

Posted: 12/22/2008 10:02:43 PM EDT

[#8]

This is the SEF lower from ICS, very easy to install if you have a Dremel or similar.

Posted: 12/23/2008 5:09:10 PM EDT

[#9]

I just ordered one of the SEF lowers. Didn't someone do a step by step with pics of the install and adjustment process?

Posted: 12/23/2008 7:02:53 PM EDT

[#10]

Quoted:
I just ordered one of the SEF lowers. Didn't someone do a step by step with pics of the install and adjustment process?

I thought I saw a thread on this to. But I can't find it. I want to do the SEF lower on mine. I would like to see the step-by-step as well.

Posted: 12/23/2008 9:51:50 PM EDT

[#11]

You'll have to enlarge the hole that the safety shaft goes through and grind a bit off the back of the safety levers to let them go over those raised ridges of the SEF. But other than that it's really just trial and error to grind out the little plastic tabs inside the new grip till it all slips together. After doing my first one, the second one could probly be done in a half hour or so.

Posted: 12/25/2008 6:22:50 PM EDT

[#12]

So what does the selector do on the third option? Like does it do anything besides safe and semi

Posted: 12/25/2008 7:38:43 PM EDT

[#13]

It's back to "Safe" in that position, but you'll know if you pass the "Fire" position, it's a pretty solid "click".

[ARCHIVED THREAD] - Navy lower

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Navy lower

[ARCHIVED THREAD] - Navy lower