Armory Sponsor
Posted: 9/2/2015 8:00:24 PM EDT
|
Anyone own or have experience with a F/A Tec 9? I didn't think any existed, but it makes sense, as the gun was introduced in '85. Any thoughts or opinions? |
|
Interdynamic KG9/MP9
Interdynamic KG99 Intratec Tec 9 Intratec DC 9 They all look very similar, and one of them is pre 1986 & goes pew-pew pew-pew pew-pew pew-pew from an open bolt. 
http://www.imfdb.org/index.php?title=Interdynamic_KG-9_/_Intratec_TEC-9 They are bullet hoses ment for looking mean, but not known for accuracy. |
|
Quoted:
Anyone own or have experience with a F/A Tec 9? I didn't think any existed, but it makes sense, as the gun was introduced in '85. Any thoughts or opinions? Shot a F/A KG-9 which was OB. Were the F/A versions of the Tec-9 Open bolt of Full Auto? This gun was a regular on Miami Vice. |
|
Quoted:
Shot a F/A KG-9 which was OB. Were the F/A versions of the Tec-9 Open bolt of Full Auto? This gun was a regular on Miami Vice. Quoted:
Quoted:
Anyone own or have experience with a F/A Tec 9? I didn't think any existed, but it makes sense, as the gun was introduced in '85. Any thoughts or opinions? Shot a F/A KG-9 which was OB. Were the F/A versions of the Tec-9 Open bolt of Full Auto? This gun was a regular on Miami Vice. The original SMG was the Interdynamics MP-9.....selective fire with an M-3 Greasegun style collapsable stock and a VFG KG-9 was the open-bolt semi version of the MP-9 (no stock or VFG) KG-99 was the closed bolt (post-'82) version of the KG-9. The TEC-9's came later.....trying to cash in on the "convertability" of the earlier guns..... A KG-9 bolt will drop straight into a KG-99.....but doing so is an NFA violation, even though all you have made is an open-bolt semi...... CATCO made some registered bolts post-'82/pre-'86.......and I've seen a few registered receiver conversions done by modifying the disconnector of KG-9's..... Don't run hot ammo thru them...115gr is enough.......because the lower (registered/serialed part) will crack/break.......thats why a registered bolt is the way to go.....just swap it from one "ghetto blaster" host gun to another after it snaps in half.......... |
|
I've been offered a registered bolt for a approximately the price of a MAC. I'm really debating. It's a relatively small amount for a rare MG. But the Tec9 is so ugly that I'm torn on what to do. I like the rarity of the gun, but again, it's a ridiculous gun. Maybe I just need it for my collection. I'm very undecided on whether or not to buy it. I might just buy it for the rarity, and then shoot it once a year. Decisions, decisions... |
|
Quoted:
I've been offered a registered bolt for a approximately the price of a MAC. I'm really debating. It's a relatively small amount for a rare MG. But the Tec9 is so ugly that I'm torn on what to do. I like the rarity of the gun, but again, it's a ridiculous gun. Maybe I just need it for my collection. I'm very undecided on whether or not to buy it. I might just buy it for the rarity, and then shoot it once a year. Decisions, decisions... Can you 3D print a frame? I imagine with age and the low quality plastic used, there will be a point where all the frames will crack with just a few mag dumps. |
| "Uzi, Ingram, and Intratec firearms: in the eyes of many, they have become the Terrifying Three, guns that spew out a deadly hail of projectiles faster than a person can blink, weapons that heroes and bad guys all recognize as the ultimate in weaponry..." So begins the 1989 book, The Terrifying Three" by Duncan Long. |
|
There a lot of gun culture silliness about the Interdynamics (later Intratec) design that's been repeated so often over the years it's become truth. It's often not.
Over the course of years that the company property changed ownership from hand to hand, it is true that models did decline in quality from the original Interdynamics MP-9/KG-9 design down to the last TEC-DC9 models before Intratec finally went tits up. Overall, these guns -- at least the earliest models -- don't deserve the abuse that popular gun culture has heaped on them. A full auto open bolt Interdynamics gun is as reliable as any tube gun SMG and is even better than many others. Originals came with good mags (the Swedish K design) and were quite reliable. They just have a ripping fast cyclic rate and in that small of a package it can be disconcerting to even experienced shooters. They also have no drop safety, so you need to consciously treat it like an early model Sten gun. Come to think of it, if the MP-9/KG-9 machine pistol had been around during WWII in British service it would today probably be regarded as a celebrated weapon of British para commandos alongside the Sten gun. The comical portrayal of the KG-9 as shown in the Michael Douglas movie 'Falling Down' (the Whammyburger scene) is a pretty accurate portrayal of a full auto open bolt Interdynamics pistol. They'll empty a full mag in about a second and a half without fail. The later model closed bolt KG-99s can exhibit pretty startling accuracy, especially when demonstrated in front of shooters who've been led to believe these guns are an "inaccurate jamtastic POS". Be extra vigilant to ensure that your closed bolt version of the Interdynamics/Intratec pistol has a unloaded chamber before disassembly as they will fire upon disassembly if there's a round in the chamber. Also, an Interdynamics production-spec KG-9 bolt will not function in a KG-99/TEC-9 without modification to the upper reciever tube. |
| We'll, it's wayyyyyy down my list and wouldn't be a priority for me, but you have one helluva collection Tony. With respect, whats $5000-6000 to a guy who just bought two M240s in the same month? Buy it and add it to the collection. It's an interesting piece for a reasonable amount of coin |
|
Quoted: We'll, it's wayyyyyy down my list and wouldn't be a priority for me, but you have one helluva collection Tony. With respect, whats $5000-6000 to a guy who just bought two M240s in the same month? Buy it and add it to the collection. It's an interesting piece for a reasonable amount of coin I have a ton of mgs and I only shoot 3 regularly and 2 more on occasion. The rest are cool. But they take up room and clutter up my safe and can become burdensome |
|
It was a tough decision, but I ended up not buying it because I figured I would buy it and then never shoot it. I really can't see myself enjoying a TEC9. I shoot all my machine guns, and I just couldn't see myself taking this one out more than the first time. Especially with the machine pistol incoming, I don't really have a desire to have the TEC9. It was a close decision though. I kind of wanted it just to say I have it (collector mentality), but in the end, what tipped me to the 'no' was when the brokering dealer admitted that the TEC9, fired in full auto does tear up the gun, this necessitating replacement guns. The pain is that replacing the guns isn't like a drop in RDIAS. It needs a smith. |
|
Quoted:
Shot a F/A KG-9 which was OB. Were the F/A versions of the Tec-9 Open bolt of Full Auto? This gun was a regular on Miami Vice. Quoted:
Quoted:
Anyone own or have experience with a F/A Tec 9? I didn't think any existed, but it makes sense, as the gun was introduced in '85. Any thoughts or opinions? Shot a F/A KG-9 which was OB. Were the F/A versions of the Tec-9 Open bolt of Full Auto? This gun was a regular on Miami Vice. Completely off topic, but I have wondered for the longest damn time where your avatar is from. My friend loaned me a copy of High Risk because my three MACs make me the biggest MAC fan ever, apparently. Fun movie. |
Armory Sponsor