Armory Sponsor
Posted: 2/7/2016 4:44:23 PM EDT
|
Looking for a suppressor for a 9mm AR SBR. Size is most important factor--want something small and light. Modularity doesn't matter since it will spend most of it's time on the AR
suggestions? |
|
Quoted:
another question regarding 9mm ARs and suppressors. I have a noveske barrel that has a 1/2x32 36 threads. I haven't been able to find an adapter so that I can fit 1/2x28 or 1/2x36. any suggestion? FIFY first hit on google 
Or rethread it... |
|
Quoted:
another question regarding 9mm ARs and suppressors. I have a noveske barrel that has a 1/2x32 threads. I haven't been able to find an adapter so that I can fit 1/2x28 or 1/2x36. any suggestion? You're certain it's x32 and not x36? I run a TROS 1/2-36 to 1/2-28 adapter on my (non-Noveske) 9mm AR. |
|
yep. I double checked with noveske. I'm kind of bummed. it looks like the easiest path is to buy a new barrel. I checked with a few shops that machine adapters and was told the 1/2x32 is an odd pattern and that they didn't have the proper taps to make an adapter. this sucks. I was going to order an Omega 9k tomorrow
|
|
Quoted:
yep. I double checked with noveske. I'm kind of bummed. it looks like the easiest path is to buy a new barrel. I checked with a few shops that machine adapters and was told the 1/2x32 is an odd pattern and that they didn't have the proper taps to make an adapter. this sucks. I was going to order an Omega 9k tomorrow I'd think the easiest thing, since you're considering replacing the barrel, is to send the barrel to ADCO and for $65 and a week or two of time, they'll thread it to 1/2-28 or x36. (Assuming you're OK losing 1/2"-3/4" of length. I'm also assuming you've actually counted the threads to see if there are 28 or 32 or 36 in an inch, just to be 100% sure. 
|
|
Quoted:
ok I found an easier fix. I called silenceco. I can add the harvester thread mount in 1/2x32. Ordered. Going to go order the can--problem solved You're going to use a Harvester on a 9mm? 
Or I'm guessing the Harvester thread mount works in the Omega 9K? (Is it the Harvester mount, or Harvester Big Bore mount?) |
|
Quoted:
You're going to use a Harvester on a 9mm?
Or I'm guessing the Harvester thread mount works in the Omega 9K? (Is it the Harvester mount, or Harvester Big Bore mount?) Quoted:
Quoted:
ok I found an easier fix. I called silenceco. I can add the harvester thread mount in 1/2x32. Ordered. Going to go order the can--problem solved You're going to use a Harvester on a 9mm?
Or I'm guessing the Harvester thread mount works in the Omega 9K? (Is it the Harvester mount, or Harvester Big Bore mount?) Probably the Harvester since the Harvester and Octane fixed mounts are interchangeable. The Harvester thread mount will go into the Omega-9K cage that holds the piston/spring/retaining cap assembly. |
|
Quoted:
Probably the Harvester since the Harvester and Octane fixed mounts are interchangeable. The Harvester thread mount will go into the Omega-9K cage that holds the piston/spring/retaining cap assembly. Good to know. I've held a Harvester, but never really paid much attention to it since I have no use for one. |
Armory Sponsor