User Panel
User Panel
User Panel
|
Posted: 8/11/2019 12:15:30 PM EDT
[Last Edit: DCV_117]
[#1]
Q Trash Panda
120 rounds 300 BLK subsonic (8'') 120 rounds 300 BLK supersonic (8") 30 rounds 556 (16'') 60 rounds 6.5 Grendel (16'') 45 rounds 6.5 CM (18'') 
|
|
|
|
|
Posted: 8/12/2019 5:10:14 PM EDT
[Last Edit: MisterDurden]
[#2]
Surefire SOCOM RC2 with just under 3400 rounds through it, almost all on 10.5/11.5” barrels.
 Attached File |
|
|
|
|
Posted: 8/13/2019 9:48:39 PM EDT
[#3]
|
|
|
|
|
Posted: 8/21/2019 10:38:41 AM EDT
[Last Edit: AZ2A]
[#4]
M4-2000 5.56 Suppressor
 Attached File Attached File Attached File-Approximately 20,000-30,000 rounds of M193 fired since 2014 -Many strings of full auto over the years -Still wearing the original latch with ZERO issues -50/50 use between flash hider and brake mounting -Early in it's life I had one extremely small end cap strike -Approximately 60% use on 11.5", 20% use on 12.5", and 20% use on 14.5 and longer. |
|
|
|
|
Posted: 8/21/2019 2:48:44 PM EDT
[#5]
Quote HistoryOriginally Posted By AZ2A:
M4-2000 5.56 Suppressor https://www.AR15.Com/media/mediaFiles/482038/helW8xw__1__jpg-1062095.JPG https://www.AR15.Com/media/mediaFiles/482038/71xgnld_jpg-1062096.JPG https://www.AR15.Com/media/mediaFiles/482038/YtFEShp_jpg-1062097.JPG -Approximately 20,000-30,000 rounds of M193 fired since 2014 -Many strings of full auto over the years -Still wearing the original latch with ZERO issues -50/50 use between flash hider and brake mounting -Early in it's life I had one extremely small end cap strike -Approximately 60% use on 11.5", 20% use on 12.5", and 20% use on 14.5 and longer. 
|
|
|
|
|
Posted: 9/23/2019 11:12:05 PM EDT
[Last Edit: MisterDurden]
[#6]
 Attached File Attached FileAlmost to 4K bump, it’s showing some character haha Surefire RC2 on 10.5/11.5 barrels @AZ2A thanks for the post, can looks great |
|
|
|
|
Posted: 11/20/2019 11:21:50 PM EDT
[#7]
Surefire RC2, just broke the 4k mark. Almost all rounds on 10.5/11.5” barrels.
@thehorrorthehorror any input?  Attached File |
|
|
|
|
Posted: 11/21/2019 4:28:50 AM EDT
[Last Edit: TheHorrorTheHorror]
[#8]
Quote HistoryOriginally Posted By zachsmith526:
Surefire RC2, just broke the 4k mark. Almost all rounds on 10.5/11.5” barrels. @thehorrorthehorror any input? https://www.AR15.Com/media/mediaFiles/171069/829A837F-03DB-43E4-A6C0-985AEDA7A1E3_jpeg-1168316.JPG |
|
|
|
|
Posted: 1/22/2020 6:49:33 PM EDT
[Last Edit: DCV_117]
[#9]
Q Trash Panda
120 rounds 300 BLK subsonic (8'') 210 rounds 300 BLK supersonic (8") 30 rounds 556 (16'') 60 rounds 6.5 Grendel (16'') 65 rounds 6.5 CM (18'') 485 total 12.3 oz Q claims the stock weight of the TP to be 11.8 oz, I never weighed mine before firing it to confirm this but if that is true then over the course of 485 rounds it gained a 0.5 oz in weight which I doubt. We'll see if it changes after the next range session. Most of 300 BLK that has been through it was either S&B 200 gr subs or Australian Outback 110gr.  Attached File Attached File |
|
|
|
AZ, USA
|
Posted: 1/22/2020 7:07:56 PM EDT
[Last Edit: KalmanPhilter]
[#10]
That’s about 0.4 grains of residue/carbon per shot, or about 1% of a .308 powder load by mass. Closer to 2% for a supersonic .300BO. Seems a little high but not inconceivable. Lots of surface area and sharp corners in the can to collect build-up.
|
|
|
MT, USA
|
Posted: 1/22/2020 10:37:02 PM EDT
[#11]
Evolution 9
|
|
|
|
Posted: 1/23/2020 1:27:29 AM EDT
[#12]
Rugged Razor run on 11.5 SBR, attached via muzzle brake
90rds 
~400rds 
|
|
|
|
|
Posted: 1/31/2020 5:41:08 PM EDT
[#13]
@zachsmith526 Update?
|
|
|
|
|
Posted: 2/1/2020 5:51:12 PM EDT
[#14]
Quote HistoryOriginally Posted By TheHorrorTheHorror:
@zachsmith526 Update?  Attached FileAt 4500 over the last 18 months, can is showin some wear haha  Attached File |
|
|
|
|
Posted: 2/10/2020 4:07:18 AM EDT
[Last Edit: OAK667]
[#15]
GA Recce 5 (Repaired Once) (11.5in SBR all XM193)- 1k
AAC Titan QD 300 WM (XM2010)- 50 rounds 300 Blackout (9in SBR)- 300 rounds mixed Sub and Sup. 
|
|
|
|
|
Posted: 5/1/2020 1:22:43 PM EDT
[Last Edit: MisterDurden]
[#16]
@TheHorrorTheHorror any pics of a pretty new blast baffle?
Here’s my RC2 with just shy of 4700 rounds, almost all through 10.3”/11.5” uppers:  Attached FileMaybe we can get @krdt, @MNRidesHonda, and @NickOTime in here too, they have some good baffle pics... |
|
|
|
|
Posted: 5/1/2020 8:42:58 PM EDT
[Last Edit: krdt]
[#17]
Quote HistoryOriginally Posted By zachsmith526: @TheHorrorTheHorror any pics of a pretty new blast baffle? Here’s my RC2 with just shy of 4700 rounds, almost all through 10.3”/11.5” uppers: https://www.AR15.Com/media/mediaFiles/171069/D13CD12C-B099-4142-8934-E8280E724921_jpe-1395825.JPG Maybe we can get @krdt, @MNRidesHonda, and @NickOTime in here too, they have some good baffle pics... Surefire RC @ 10k (100% 10.3" w/ 4 Prong)  Surefire RC @ 11k (100% 10.3" w/ 4 Prong)   KAC NT4 @ 1500 (100% 10.3" w/ M4QD)  Surefire RC from 0 through 10k animation: https://i.imgur.com/PlXbW3w.mp4 |
|
|
|
|
Posted: 5/2/2020 9:01:10 AM EDT
[#18]
@krdt, good stuff, thanks
|
|
|
|
|
Posted: 5/2/2020 5:10:26 PM EDT
[Last Edit: NickOTime]
[#19]
 Attached File Attached File Attached FileGot the @. This is a KAC NT4 with approximately: -2000-3000 rounds down the pipe mounted on a regular a2 style NT4 mount on two 14.5" guns -500-1000 rounds on a BE Meyers Prototype NT4 mount on a 10.3" -500-1000 through a MAMS NT4, Triple Tap, and Griffin Armaments NT4 comp on three 11.5"guns -75-100 22lr rounds through it mounted to a 20" barrel. But I don't like/reccomend using it on .22s. |
|
|
|
|
Posted: 6/4/2020 9:16:17 PM EDT
[Last Edit: MisterDurden]
[#20]
|
|
|
|
FL, USA
|
Posted: 6/5/2020 3:15:38 PM EDT
[#21]
Here are my jail-broken can's. I don't have exact round counts but I can estimate. All the 556 cans get used very roughly.
 AAC M4-2000. My oldest can, 10k+ rounds and lots of high volume shooting. I haven't shot it in awhile, i've never noticed the silverish color on the blast baffles before.  AAC Mini-4. 5k - 10k rounds and a lots of high volume shooting.  Surefire Soccom: 10k+ rounds, used with 3P's, 4P's, CT's, warcomps. The grooves cut in the blast baffle look deeper in person to me; this picture makes them look not to bad.  SAS Barricade: 500ish 6.5cm rounds on a precision rifle with a muzzle brake. Light use for a can and there is no visible wear, just lots of copper residue.  Surefire 7.62 Mini: around 2k rounds mixed between 308 and 300blk with CT flash hiders and muzzle brakes.  |
|
|
TN, USA
|
Posted: 6/6/2020 3:11:03 AM EDT
[#22]
YHM Turbo V1 with a brake @ a bit north of 1k rounds. Mostly through a 10.3" SBR with some usage in a 14.5" midlength. 100% handloads with CFE powder. Baffle looks pristine outside of being dirty.
 |
|
|
TN, USA
|
Posted: 6/12/2020 11:57:09 PM EDT
[#23]
Turbo now at 1.5k rounds, all handloads.
 |
|
|
CO, USA
|
Posted: 6/16/2020 9:39:56 PM EDT
[Last Edit: precisionphilosophy]
[#24]
Awesome thread, keep it up!
Does anyone have any particular pics or experience with 17-4 SS baffles (radials ideally) on short (10.5"-11.5") 5.56/.223 guns running "carbine course" firing schedules? What does wear look like? Flash hiders or muzzle breaks, please just specify! |
|
|
|
Posted: 6/17/2020 12:51:24 AM EDT
[#25]
17-4 wears a lot like 718 inconel. It’s only prone to wear over ~1150f. All suppressor metal is getting soft between 1100 and 1300f. 6AL4V titanium begins to erode badly over 900, and melts and starts on fire somewhere in the 1150-1350f range. 625 inconel isn’t substantially hard at room temperature so it is moderately subject to wear even at lower temperatures. 300series stainless is softer yet and it really doesn’t belong in any hard use suppressor baffle.
We have used all of the above materials in production or R&D products at one time or another and I’ve seen them all run hard to see how they compare. Geometry and baffle proximity to the muzzle also plays a role in durability or lack thereof. There is little or no practical reason to run rifles that hard. Getting to 1150 is like 5 30 round mags of full auto fire. At 1150f 556 cans are dropping ~400f of heat per minute, or enough to shoot about 20 rounds a minute sustained. |
|
|
|
TN, USA
|
Posted: 6/27/2020 10:52:23 PM EDT
[#26]
 Turbo now at 2k rounds. I'm very impressed with how it's wearing in. The muzzle brake is getting eaten up pretty good but that's the point. |
|
|
|
Posted: 7/29/2020 3:50:29 PM EDT
[Last Edit: TheHorrorTheHorror]
[#27]
Fresh RC2 out of the box
 Attached FileAnd here it is at 50rds. 10.5” bbl, SF Warcomp.  Attached FileHere’s the host after breakfast  Attached File@zachsmith526 |
|
|
|
TX, USA
|
Posted: 7/29/2020 7:38:06 PM EDT
[Last Edit: jeremywills]
[#28]
AEM5 zero round count.
 AEM5 40 rounds of .223 on an 18in SPR bbl.  I've only had one visit in jail with it. I'll post back once I have a much higher round count. Just glad I remembered to snap a zero round count picture before starting to shoot a new can this time 
|
|
|
USA
|
Posted: 7/30/2020 9:25:13 AM EDT
[#29]
Glad to see YHM suppressors staying relatively clean and all...
|
|
|
|
Posted: 8/8/2020 1:11:51 PM EDT
[#30]
Surefire SOCOM SB-2 from the factory
|
|
|
|
OH, USA
|
Posted: 8/13/2020 11:50:36 PM EDT
[#31]
I have a Socom RC2 556 on the way. Really interested to see how these hold up to 20000+ rounds on a 10.3” gun.
|
|
|
TX, USA
|
Posted: 10/11/2020 1:23:37 PM EDT
[Last Edit: tone_suk1]
[#32]
Specwar 762
~1,500 556 ~200 of that is quick 3 rnd burst and FA mag dumps 11.5” barrel ASR FH 
|
|
|
|
Posted: 11/10/2020 1:35:09 AM EDT
[#33]
YHM Phantom QD 556. I've owned this new since Mar 09. This can has had a mix of 223/5.56/22lr, through 20", 16", 14.5", 10.5" and has only been run FA a handful of times. I honestly cannot fathom how many rounds I've put through this, but on a conservative side I would say 75k+ easily as I am at the range at least once a week, some times 2 or 3 and I always have the can on one of my AR's I take.
 Attached File |
|
|
|
NC, USA
|
Posted: 11/15/2020 12:44:58 AM EDT
[Last Edit: HunterB93]
[#34]
Sandman S 200 rounds .223 with flash hider and 100ish rounds subsonic 300blk with muzzle brake |
|
|
|
Posted: 11/16/2020 10:03:43 PM EDT
[#35]
Gemtech M4-96D Approx 2k rounds. Had it since 2003. Don't shoot it that often. Most of it is on a 14.5" M4 barrel with a Bi-Lock perm. mounted Almost all normal firing rate.
 Attached File |
|
|
|
|
Posted: 11/24/2020 12:26:27 PM EDT
[#36]
|
|
|
|
SC, USA
|
Posted: 11/25/2020 11:15:02 AM EDT
[Last Edit: 11B3XCIB]
[#37]
Griffin Recce 5 Mod 3
Newish in mid 2015  Presently, after 7-8k rounds at least on 10.5, 16, and 20” barrels:  AAC Mini-4 with around 1k of 10.5” 5.56 and 20” 224 Valkyrie 
|
|
|
|
Posted: 11/28/2020 9:03:59 PM EDT
[Last Edit: 1911xdm]
[#38]
|
|
|
|
|
Posted: 11/30/2020 10:37:22 PM EDT
[#39]
|
|
|
|
TN, USA
|
Posted: 1/8/2021 4:26:19 AM EDT
[Last Edit: 135Patriots]
[#40]
 Turbo at something like 5k rounds, all through brakes and 80% on a 10" SBR. Can keeps doing it's thing but has picked up about 2oz of weight  I've recently been shooting handloads with Ramshot TAC and it's imparting a visible red "stain" on the brake and the blast baffle. Not something I'm worried about, but interesting to note. |
|
|
|
Posted: 3/21/2021 1:20:17 PM EDT
[Last Edit: Sinfulsilence]
[#41]
Saker762 shows some erosion on blast baffle . My guess it for 556 ammo
556 on 14.5’’ 4K rounds 300bk 10.5 2.5k round super and sub 308win 1k 18’’ ar10  Attached File |
|
|
|
|
Posted: 3/21/2021 1:35:59 PM EDT
[Last Edit: Sinfulsilence]
[#42]
|
|
|
|
|
Posted: 3/21/2021 1:36:15 PM EDT
[Last Edit: Sinfulsilence]
[#43]
Sorry for double post
|
|
|
|
VA, USA
|
Posted: 3/24/2021 11:28:03 AM EDT
[#44]
That doesn’t look like as much erosion as metal deposition.
I bet if you cleaned it off it would show up better. |
|
|
VA, USA
|
Posted: 3/24/2021 7:24:10 PM EDT
[#45]
Pic request for direct thread YHM Turbo or Turbo K, please.
Actually, any more pictures of direct thread cans? This Innovative Arms DT looks great compared to a lot of the FH cans with similar mileage in this thread. Quote HistoryOriginally Posted By 11B3XCIB: Innovative Arms direct thread 5.56. ~8,000 rounds, half on a 16” and half on a 10.5” AR: http://i.imgur.com/83Moqk8.jpg I’m really surprised (and pleased) at how well this IA can is doing. It’s a little heavy for a 5.56 can so it’s built like a tank |
|
|
|
Posted: 5/2/2021 3:21:15 PM EDT
[#46]
Surefire RC2 with just over 6000 rounds through it, used almost entirely on 10.3” and 11.5” barrels:
 Attached File Attached File |
|
|
|
|
Posted: 5/2/2021 3:49:42 PM EDT
[#47]
Nice thread. Wish there was a way to knock off the carbon and see the bare metal.
|
|
|
|
|
Posted: 5/3/2021 4:23:13 PM EDT
[Last Edit: STJ]
[#48]
Turbo K with somewhere around 2k rounds all on a 10.5" with a modified muzzle device. I cut the brake off to save a bit of weight and when I do fire the gun unsuppressed its not as obnoxious. Also using a kurz adapter. This will give a "direct thread" approximation.
The blast baffle is fine, and so is the first main baffle. The second baffle has all the erosion, which is odd.  Attached File Attached File Attached File Attached File |
|
|
|
VA, USA
|
Posted: 5/3/2021 5:32:54 PM EDT
[#49]
Quote HistoryOriginally Posted By STJ: Turbo K with somewhere around 2k rounds all on a 10.5" with a modified muzzle device. I cut the brake off to save a bit of weight and when I do fire the gun unsuppressed its not as obnoxious. Also using a kurz adapter. This will give a "direct thread" approximation. The blast baffle is fine, and so is the first main baffle. The second baffle has all the erosion, which is odd. https://www.ar15.com/media/mediaFiles/108486/808677B3-FE52-4901-9779-545CB773B1DF_jpe-1928277.JPG https://www.ar15.com/media/mediaFiles/108486/51BEE5AF-A835-450B-AD40-32B444754ABE_jpe-1928292.JPG https://www.ar15.com/media/mediaFiles/108486/5C5962EE-599F-48C6-BBE5-1D74CDD04957_jpe-1928280.JPG https://www.ar15.com/media/mediaFiles/108486/A5801365-EB5F-4E4D-8A08-A32040CDD4A1_jpe-1928282.JPG What an interesting result… could it be that the 17-4 baffles erode more quickly than the inconel blast baffle? Have there been any 17-4 blast baffles in this thread? I need to look through it again |
|
|
TX, USA
|
Posted: 5/3/2021 6:34:08 PM EDT
[#50]
@zachsmith526 seeing how well yours has worn at 6k rounds makes me glad I went with Surefire.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
