Armory Sponsor
Posted: 3/16/2015 7:59:12 PM EDT
|
If you have either of these suppressors, please let me know the distance from the rear of the suppressor to the barrel shoulder (on an SPR barrel or Colt M4 barrel).
Thanks. |
|
I'm holding a 30 and a 5 but I fail to see how you believe their different from the taper to the back of the can? Not trying to be difficult but either I'm not understanding your question or you not sure what your looking for.
The taper is at the rear of the can on both. Their is no overhag of the can beyond where the taper meets the collar. Hope that helps. I can take a pic but haven't used PB in years. PM me a address or something and I can email or text it to you. Outside of that, contact Ron or ADCO. |
|
Ron told me about 2.65" back for the AEM5 but not from what spot (I believe that is the muzzle) and then I think he got sick of me asking questions. ADCO forwarded me to this https://www.adcofirearms.com/acc/aefit.cfm.
I believe the suppressor mounts up to a certain point on the taper, but I don't know where that point is. I'll PM you. |
|
Now that make some sense. Frankly I wouldn't get any closer than the rear of the collar. You need a little room to account for barrel harmonics, and I beleive the ADCO advice is spot on. You need to have your components to know for sure.
I sent you pics in an email. Hope that helps. |
| This sounds like a ridiculous question. Off the top of my head I'd say the rear of the can is about 1/2-2/3 up the taper of the collar. Seems like it'd be pretty easy to just not buy a handguard that goes beyond the collar. Certainly was for me. You're thinking about this way too much or not providing us with enough details about what it is you're trying to accomplish. |
Armory Sponsor