Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Log In

A valid email is required.
Password is required.
Site Notices
Posted: 6/14/2002 4:35:18 AM EDT
I recently bought a DPMS S.S. bull barrel and have a question on cleaning. I was reading in "The Complete AR-15 Owner's Guide" that "s.s. barrels require special consideration as copper solvents attract free ions of copper into the solution. Unfortunately these solvents will also remove copper ions from the s.s. alloy of the bore as well. The result is a Swiss cheese effect that will quickly roughen a s.s. bore. Therefore, use copper solvents seldom, and then briefly when cleaning s.s. barrels".

I have been using Pro-Shot lead and powder bore cleaner on my other AR's, as well as Birchwood-Casey Bore Scrubber. Any recommendations of what and what not to use ?
Link Posted: 6/14/2002 4:56:03 AM EDT
On my 24" Stainless barreled AR I use Sweets 7.62, flush w/ SuperTech 2000 (Walmart carb-cleaner) and lube w/ BreakFree CLP. Seems to work weel for me, YMMV.

Mike
Link Posted: 6/14/2002 5:44:53 PM EDT
Personally I've never read of any differences in cleaning SS barrels versus carbon steel. As it is I use mineral spirits when cleaning my barrels now. My .o2
Link Posted: 6/14/2002 8:14:48 PM EDT
Just use the Birchwood Casey. Let it soak for 15 minute at a time after brushing to get the copper out. I find that a brush allows more solvent to be put in the bore then a patch.

Patch out and Soak bore as needed.
Top Top