Armory Sponsor
Posted: 9/8/2015 10:29:27 AM EDT
| Totally new to this and have questions. Can somebody point me somewhere where i can figure out what all i need and how to set up a helmet rig for a PVS14? There seems to be a lot of options and i'm confused as to what exactly i need. For instance the TW helmets come with wilcox insert. But what does that mean? Will all wilcox mounts interface with this? What would i need to run a norotos? Why do i suddenly want all this really expensive gear? Thanks! |
|
Quoted: Totally new to this and have questions. Can somebody point me somewhere where i can figure out what all i need and how to set up a helmet rig for a PVS14? There seems to be a lot of options and i'm confused as to what exactly i need. For instance the TW helmets come with wilcox insert. But what does that mean? Will all wilcox mounts interface with this? What would i need to run a norotos? Why do i suddenly want all this really expensive gear? Thanks! However, here are some recommended variations. Anything listed up top, is direct compatible with whats listed directly below it: If you don't want to upgrade, and stay with bayonet interface: Team Wendy LTP / Team Wendy EXFIL Carbon / Team Wendy Ballistic / Ops Core Base Jump / Ops Core Carbon / Ops Core Ballistic / PT BRAVO's with (VAS shroud and Wilcox L3 3 hole) Wilcox L4 G11 ARMY/ USGI RHINO / USGI RHNO II Bayonet If you want to upgrade to a dovetail J ARM and get rid of the USGI bayonet arm: Team Wendy LTP / Team Wendy EXFIL Carbon / Team Wendy Ballistic / Ops Core Base Jump / Ops Core Carbon / Ops Core Ballistic / PT BRAVO's with (VAS shroud and Wilcox L3 3 hole) Wilcox L4 G24 Wilcox PVS-14 J ARM W/ AUTO SHUT OFF SWITCH Team Wendy LTP / Team Wendy EXFIL Carbon / Team Wendy Ballistic / Ops Core Base Jump / Ops Core Carbon / Ops Core Ballistic / PT BRAVO's with (VAS shroud and Wilcox L3 3 hole) Norotos Dual Dovetail Adapters/ Wilcox PVS-14 ARM RHNO II Dovetail / Norotos INVG / Norotos HYPER's / LO STO's / Norotos AKA2 A good rule of thumb: IF the helmet you are purchasing from our website already comes with a shroud, either molded in or already bolted on, its going to be direct compatible with just about any mount we sell. If you have any doubts, when you are looking at a specific mount arm on our website, at the bottom of the page there is a chart that will tell you what helmet shrouds it is compatible with. |
Armory Sponsor