Armory Sponsor
Posted: 6/18/2014 1:30:29 AM EDT
|
So I am a little in the dark on this one. I looked at the other threads in here and most all of the pics look to be ingrained into the lower. My brother just had his done at a shop and it is raises white letters. The guy said it would not come off and to use the alumna-Hyde stuff to make it darker. Does this should right? That you in advance. No to go renew my membership... Guess that pop up did not remind me.  __________________________________________________________________ Status: Team Member  |
|
Quoted: Sounds right... Test 1st in a small area b4 doing the entire area.  You need to stop posting, and pay attention to what forums you are posting in. This is wrong. NFA engraving has specific depth specs that must be met. The engraving must be .003" deep. There is no spec for raised letter if that is indeed what he has. It is best to send it or take it to someone who actually knows what they are doing.
|
|
Based in your description, he's out of compliance.
7.4.3 Measuring the depth of markings. The depth of all markings is measured from the flat surface of the metal and not the peaks or ridges. The height of serial numbers is measured as the distance between the latitudinal ends of the character impression bottoms (bases). ETA: I don't know how the ATF feels in regards to colorfill jobs where the depth is not the same as it was after the initial engraving. |
|
Quoted:
You need to stop posting, and pay attention to what forums you are posting in. This is wrong. Quoted:
Quoted:
Sounds right... Test 1st in a small area b4 doing the entire area. You need to stop posting, and pay attention to what forums you are posting in. This is wrong. +1 This is not the first time he has posted something completely wrong. |
Armory Sponsor