Armory Sponsor
Posted: 2/25/2011 7:55:45 AM EDT
| If you can't own a SBR until you send in the form 1, how can you fill out the form 1 where it asks the serial #. I searched the site and couldn't find any answers. |
|
The Form 1 means you're going to manufacture a new SBR. You need to have a receiver to manufacture the SBR.
Buy a Title 1 gun or a stripped lower... Whatever you're planning on doing. The serial number is the serial number of the firearm. ETA: If you're purchasing a factory SBR, you'll need to pay for the firearm and have it shipped to your local SOT. Get with him and fill out a Form 4. ETA II: Welcome to the site 
|
|
Quoted:
The Form 1 means you're going to manufacture a new SBR. You need to have a receiver to manufacture the SBR. Buy a Title 1 gun or a stripped lower... Whatever you're planning on doing. The serial number is the serial number of the firearm. ETA: If you're purchasing a factory SBR, you'll need to pay for the firearm and have it shipped to your local SOT. Get with him and fill out a Form 4. ETA II: Welcome to the site +1 or if making an NFA item from scratch .. then you would make up your own SN. |
|
Quoted:
What needs to be engraved on the lower? Thanks again 1) Manufacturer's name (or recognized abbreviation); and 2) The city and state (or recongnized abbreviation) where the manufacturer maintains its place of business The manufacturer's name should be either yours, trust name, llc name, or however you plan on building it under. ETA: there's a sticky up top of the General Class III forum that has a link to the NFA Handbook, my suggestion is to print it and read it, because not following the rules will change your life forever. |
| Thanks everyone for the clarification. When I 1st started checking into making a SBR, it seemed like a daunting task. Be it is actually a fairly simple and straightforward process. Last year I machined a complete lower from aluminum billet for my TacSol dedicated 22lr upper using cad files from CNCguns.com. I think I will do the same thing for my SBR. Just have to engrave the proper text needed and I will be gtg. Thanks again for all your help. |
Armory Sponsor